Where Is The Meter Number On My Electric Bill?

To identify your home’s power consumption and bill you for it, each meter has a unique meter number. The meter number is normally situated near the bottom of the meter’s face. It’s critical to know your meter number if you need to submit a meter reading to your utility company.

How do I find out what my meter number is?

It’s crucial to know that Kenya Power uses a variety of prepaid meter boxes, and the proper code may vary depending on the one you have. The prepaid meter box’s brand is clearly marked on the box, making it easy to identify.

A client’s initial step in loading a prepaid token is to obtain this meter number. The specific codes are kept in the meter box. For each brand, here’s how to activate a token meter:

  • ACTARIS Meter Box ACTARIS Meter Box ACTARIS Meter Box ACTA Enter or # after dialing 100.
  • Meter Box HEXING Enter or # after dialing 804
  • Meter Box CONLOG Enter or hit # after dialing #100.
  • Meter Box from SHENZEN. Enter after pressing 65.
  • When trying to retrieve your KPLC prepaid meter number, 000# and 100# may also work.

You could also contact KPLC’s prepaid meter customer service. 95551, 0703070707, or 0732170170 are the contact center numbers for all service-related issues.

In my house, where is the meter?

Your meter is normally mounted on one of your home’s outside walls. Meters are usually found where the power enters your property, so glance up to see if you can see where the power line enters from the street.

Meters will be clustered together in some apartment and multi-dwelling structures. Check to see if you’re looking at the correct meter for your apartment or unit. It can be tough to get to your meter at times. Don’t worry if this is the case; we’ll estimate your meter readings in between visits. Please don’t try to reach it by breaking your neck!

What is a meter ID, exactly?

A Meter Serial Number (MSN), sometimes known as a Meter ID, is a sequence of letters and digits, or occasionally just numbers, that is unique to each gas or electricity meter. An MSN is used by energy companies to give accurate invoicing to your address. It’s sometimes confused with MPRN, MPAN, and supply point numbers.

What is the best way to retrieve the meter number from a prepaid meter?

To locate your prepaid power meter number, enter a unique code.

  • Press 804 if you have a hexing meter.
  • Press i000 if you have a Landis+Gyr meter. (below the number 9) is the information button I
  • Press #100# if you have a Conlog meter.
  • Enter 75 if you have a Wasion meter.

How can I read the reading on my electric meter?

There are 5 or more dials on an electricity dial meter. Each of them takes a turn pointing to a number between 0 and 9.

Your meter’s dials will spin in the opposite direction of the ones next to it. Check the direction of your dials before reading them. Some dial meters start with a clockwise dial, while others start with an anticlockwise dial.

To read the meter, follow these steps:

  • Ignore any red dials or dials marked 1/10 and read the first 5 dials from left to right.
  • If the pointer is between two numbers, write down the lower of the two. For example, if the pointer is between 9 and 0, write down 9.
  • If your pointer is directly above a number, jot it down and highlight it.

Check the next dial to the right if you’ve underlined a number. Reduce the number you’ve underlined by one if the pointer on that dial is between 9 and 0. If you initially put 5, for example, replace it to 4.

How do I check the balance on my meter?

  • Open the card door of your monitor unit and carefully insert your smart card where your pre-paid meter is positioned.
  • Always keep the control box charged by connecting it to a power supply.
  • A symbol similar to this appears after inserting the smart card “On the LCD screen, it will be visible. This indicates that the prepaid meter and card are on the same page. To avoid damaging the pre-paid meter, do not remove the smart card while reloading is in progress.
  • The user will be notified on the LCD panel after the device has been loaded.
  • Credit Units Used in Total: Make a call “You will receive a response immediately if you dial 07 on the keypad and then the blue button.
  • If you don’t know your meter number, simply dial it “65, then press the blue button, and the meter number will appear on the screen, which is 11 digits long.
  • Balance: To check your prepaid meter balance, simply dial “07 followed by the blue button on the keypad. The amount of money you have available will be shown.

What is the appearance of my power meter?

What is the appearance of my power meter? Domestic power meters in most homes will resemble a square-shaped box mounted on the wall with a six-digit LCD display. They come in a variety of colors, with more recent meters being white and having a plastic face with a blinking red light on the front.

Is there an electric meter in every home?

You will almost certainly have an electricity meter if you live in an apartment building and are being billed directly for your energy usage, but it is possible that it will not be inside your flat. The energy facilities were frequently centralized into one room, usually on the ground floor, when these blocks were created. Each meter should be labeled for the apartment to which it belongs, but this is not always the case, so check with your landlord.

If your landlord is billing you instead of the energy company, it’s likely that they just have one meter and are charging you a percentage of that.

Your Meter Numbers

Another reason you might need to examine your electricity meter is to obtain your meter number, which is often an 11-digit code. It should begin with two letters that indicate the manufacturer and two numbers that indicate the calibration year.

What is the purpose of a house meter?

An electric meter, often known as an energy meter, is a device that measures how much electricity a building, tenant space, or electrically powered equipment consumes.

Electric utilities monitor electric energy delivered to its customers using electric meters put on their premises for billing purposes. They’re usually calibrated in billing units, with the kilowatt hour being the most popular. Each billing period, they are normally read once.

-> Demo Now: The Enertiv Platform for Tenant Submetering and Equipment Monitoring

When energy savings are required during specific periods, some meters may monitor demand, or the maximum amount of electricity used in a given timeframe. Electric prices can be varied throughout the day, and usage can be recorded during peak, high-cost hours and off-peak, low-cost periods using “time of day” metering. In some regions, meters also feature demand response load shedding relays for high load periods.

A meter serial number has how many digits?

The meter serial number (MSN) is a string of letters and numbers that uniquely identifies the meter. They’ll be affixed to your meter box as follows: The MSN is normally placed above or below the barcode on conventional meters and is between nine and twelve digits long.