Enter advanced mode by pressing F7, then check to see if the hard disk is recognized. If the device is not recognized, press F9 to reset the BIOS to its default settings.
What is the procedure for resetting the BIOS utility on my ASUS laptop?
Hotkey 3 is pressed. Select Yes and press 4 to confirm whether to save and exit the BIOS configuration. The computer will restart and enter Windows when the BIOS settings have been reset.
What is the purpose of the ASUS BIOS utility EZ Mode?
It’s also conceivable that it’s stuck in BIOS mode because the hard drive is dead or dying, so check under Storage devices in BIOS setup to see whether it’s still working. If it isn’t recognized, you’ll need to reseat it, adjust or change the cable, or replace the hard drive and reinstall Windows.
How do I get my ASUS BIOS to work again?
The first way is to recover the BIOS using the motherboard support DVD:
- Turn on the optical drive and insert the motherboard support DVD when it has booted.
- When you restart the computer (by pressing the keys ctrl + alt + delete at the same time), the “EZ Flash 3” BIOS upgrade interface will appear.
What’s the best way to get my BIOS settings back?
- On the keyboard, press and hold the CTRL + ESC keys until the BIOS Recovery page appears.
- Select Reset NVRAM (if available) from the BIOS Recovery screen and press the Enter key. To save the current BIOS settings, select Disabled and hit Enter.
Restart your computer and press the key that takes you to the BIOS setup screen. Depending on your computer, the precise key is different. The F2 key, for example, will open the BIOS on some Dells, whereas F10 will open the BIOS on some HPs and F1 will open the BIOS on some Lenovos. If you have a different brand of computer, look at the screen carefully when you first switch it on; it should prompt you.
To reset the machine to its default, fall-back, or factory settings, use the arrow keys to browse through the BIOS menu. Select the “File” option on an HP PC, then “Apply Defaults and Exit.” Press “F9” or select “Exit” followed by “Load Optimal Defaults” on a Lenovo. Press “Alt-F” on a Dell. Consult your computer’s owner’s handbook for specific instructions.
In BIOS, how do I escape utility mode?
To quit the BIOS setup tool, use the F10 key. To save your changes and dismiss the Setup Confirmation dialog box, press the ENTER key.
What should I do if my BIOS is stuck?
The tool’s UI is user-friendly, and even inexperienced users will find it simple to use. As a result, if your PC is stuck on the BIOS screen, follow the procedures following to restore data:
To begin with, you’ll need another computer that functions well. So, in this working computer, insert the DVD/CD or USB that you used in solution (4) above. Making bootable media will allow you to gain access to your disk and use Recoverit to retrieve your data.
Download and install Recoverit Data Recovery after the CD/DVD or USB is inserted. Select “Recover from Crash Computer” from the “Advanced Recovery” drop-down menu, then “Start.”
The bootable media will be created in the next window. Choose CD/DVD or USB depending on the device you’re using, then click “Create.” If you choose a USB drive, you will be asked to format it. Select “Format” > “Create” from the drop-down menu.
Recoverit will download the necessary firmware for producing bootable media in the following window. It will then format your hard disk before making bootable media. You will be contacted once this has been finished. Depending on the situation, eject your DVD/CD or unplug your USB.
Go to the computer’s BIOS settings if it’s stuck on the BIOS screen. Change the boot order of the computer to allow it to boot from a USB drive or a CD/DVD. Insert the bootable USB or insert the DVD/CD into the malfunctioning PC.
You should now be able to access your problematic computer after rebooting it. Connect an external disk to utilize as a storage device for the data you’re about to retrieve.
You will be given two recovery modes to choose from: “Data Recovery” and “Hard Disk Copy.” Select “Data Recovery” from the drop-down menu. Select your files from the drive where they were initially saved. Recoverit will scan the device and retrieve all of your files after you click “Start.”
You can see a preview of your files while they are being retrieved one by one. Select the external drive you plugged in step (2) above as the location where you desire to save your files once the scanning is complete and all of your data has been recovered.
You can’t seem to get out of the BIOS screen?
- Go to Security Options in BIOS and turn off Secure Boot. Save your modifications and restart your computer.
- Return to the BIOS and choose the Boot section this time. Turn off Fastboot and turn on CSM (Compatibility Support Module).
After that, your computer should recognize your hard disk, and the problem should be resolved.
How do I go back to the basic BIOS settings without a display?
Champion. Flip the switch on your power supply to off(0) and remove the silver button battery on the motherboard for 30 seconds, put it back in, turn the power supply on, and start up; this should reset you to factory defaults, regardless of what motherboard you have.