Here’s everything you need to know about your water account, including how to calculate the total charges on your bill.
How much does Manila Water cost per cubic meter?
For the second quarter of 2021, the MWSS RO has confirmed a tariff adjustment on customers’ water bills.
Based on its examination of the Concessionaires’ FCDA proposals, the MWSS Board of Trustees (BOT) has approved the MWSS Regulatory Office’s (RO) recommendation to adopt the 2021 2nd Quarter Foreign Currency Differential Adjustment (FCDA) effective 01 April 2021.
Manila Water Company, Inc., which provides water and wastewater services in the East Zone Concession Area, will impose an FCDA of 0.84 percent of its 2021 Average Basic Charge of Php28.52 per cubic meter, or Php0.24 per cubic meter. This is a Php0.05 per cubic meter increase above the previous FCDA of Php0.19 per cubic meter.
Maynilad Water Services, Inc., which serves the West Zone Concession Area, will charge a negative 0.41 percent FCDA on its 2021 ABC of Php36.24 per cubic meter, or negative Php0.15 per cubic meter. From the prior FCDA of negative Php0.14 per cubic meter, this represents a downward adjustment of Php0.01 per cubic meter.
The FCDA is a quarterly-reviewed tariff mechanism that allows concessionaires to recover losses or give back gains due to fluctuations in foreign exchange rates while making payments for foreign currency-denominated loans used to expand and upgrade water and sewerage services. It’s a correction mechanism devised by the MWSS RO to prevent under- or over-recovery as a result of currency movements.
What is the formula for calculating Manila Water?
Do we have to wait for the MBWD’s meter reader to figure out how much water we use in a month? There’s no need! In fact, using basic mathematics, we can calculate our monthly water consumption. The key to understanding your household water usage is to look at your water meter. The amount you are charged each month on your water bill is determined on the reading from your water meter.
1) For starters, you might be curious in how much water you use in a day. You may calculate how much water you and your family used by comparing the two totals from your meter at the start and end of the day.
2) Checking for leaks is the second reason. Look at the leak detection indicator* on your meter after you’ve turned off all the taps and water-using appliances in your house. If it’s turning, you’ve probably got a leak someplace.
Read your meter at the same time every day for the best results. Water usage is measured in cubic meters by meters.
To figure out how much water you’ve used since your last measurement, multiply the current meter reading by the prior meter reading (from your water bill) to get the number of cubic meters utilized. If your prior reading was 001,200 and your new reading is 001,250, you have used 50 cubic meters of water since your previous reading. Because one drum equals 200 liters, 1 cubic meter is equal to 5 drums.
It is a novel Metro Bangued Water District connection installation technique in which water meters of clustered concessionaires or concessionaires whose dwellings are close together are put or clustered at just one location and share one tapping point at the District’s distribution line. Furthermore, all water meters have been set at the road’s shoulders or outside private houses. All meters that were previously set inside private lots were transferred outside the concessionaires’ grounds.
The following are the goals of water meter clustering:
- Non-revenue water will be reduced as unlawful connections and water meter theft are avoided, and the likelihood of future leaks will be reduced as tapping sites in distribution lines are vulnerable to leakage owing to wear and tear.
- During the reading period, there is easy access to the water meters.
- To avoid unpleasant situations and make disconnection activities easier to conduct.
- To avoid mishaps such as dog bites when reading meters, etc.
In the Philippines, how do you calculate the Bill of Water?
- B. Environmental Charge: The Environmental Charge is required to mitigate ecological damage and protect the environment by assuring wastewater treatment and removal of toxic chemicals and nutrients prior to discharge into bodies of water.
- C. Sewer Charge: Commercial and industrial clients that are connected to our separate sewer lines are subject to a sewer charge. This customer’s wastewater is of a different quality and requires more treatment.
- D. Water Meter Maintenance Service Charge: This fee covers the cost of maintaining the water meter. The fee is calculated based on the size of the water meter. For a 13-mm size meter, the minimum charge is P1.50.
- Taxes levied by the government: the sum of the local franchise tax and the national franchise tax
- If there are any extra charges, add them to the prior unpaid amount to get the Total Amount Due.
Other Fees: These are non-recurring fees such as connection fees, unscheduled septic tank desludging fees, and so on.
Charges billed previous to the billing period are included in this category. To avoid water service being disconnected, this should be settled as soon as possible, together with the current charges.
- Bill Adjustment: This refers to any changes made as a result of the execution of Manila Water’s Legislative Franchise. This usually entails removing the 12 percent VAT and replacing it with a 2 percent National Franchise Tax, as well as the real rate of Local Franchise Tax imposed by the local government unit.
In Maynilad 2021, how much is a cubic meter of water?
After the Metropolitan Waterworks and Sewerage System (MWSS) approved a quarterly adjustment for the water distribution utilities, Manila Water Company Inc. customers can expect higher water bills and Maynilad Water Services Inc. customers can expect reduced rates in the second quarter of 2021.
MWSS chief regulator Patrick Ty announced at a virtual press conference on Thursday that the MWSS Board of Trustees has approved its recommendation to implement the 2021 second quarter foreign currency differential adjustment (FCDA), which will take effect on April 1, 2021 “based on its assessment of the concessionaires’ FCDA proposals
The FCDA is a system for accounting for foreign exchange losses and gains resulting from MWSS and private sector concessionaires’ loans for capital expenditures and concession fees.
It is a corrective mechanism devised by the MWSS in order to avoid under or over recovery as a result of currency movements.
Manila Water, the concessionaire for the East Zone, will impose an FCDA of 0.84 percent of its average basic rate of P28.52 per cubic meter in 2021, or P0.24 per cubic meter.
“According to Ty, this represents an increase of P0.05 per cubic meter above the previous FCDA of P0.19 per cubic meter.
For Manila Water’s residential customers who consume 10 cubic meters or less per month, the adjustment corresponds to a monthly rise of P0.27 “Except for lifeline consumers, who are exempt from the FCDA’s quarterly fees.
Those who use 20 and 30 cubic meters of water per month will notice a P0.60 and P1.22 rise in their monthly water bills, respectively.
Meanwhile, Maynilad, a concessioner in the West Zone, will impose an FCDA of -0.41% of its average basic charge of P36.24 per cubic meter in 2021, or -P0.15 per cubic meter.
“According to the MWSS chief regulator, this is a P0.01 per cubic meter decrease from the previous FCDA of -P0.14 per cubic meter.
Maynilad household customers who consume 10 cubic meters or less are projected to enjoy a P0.08 reduction in their monthly payments as a result of this.
Those who use 20 cubic meters per month will get a P0.10 decrease in their monthly costs, while those who use 30 cubic meters will experience a P0.20 reduction.
“The reason for the increase in Manila Water and the reversal in Maynilad is that a large amount of Manila Water’s debts are in Japanese yen and euros. The appreciation of the Japanese yen and euro against the Philippine peso resulted in an increase in their (Manila Water’s) FCDA, according to Ty.
“The majority of Maynilad’s loans due this quarter are in US dollars. According to him, the peso rose against the US dollar, resulting in a setback of P0.01 per cubic meter.
Manila Water serves the eastern section of Metro Manila, including the cities of Mandaluyong, San Juan, Pasig, Marikina, Taguig, Pateros, Makati, Manila, and Quezon City, as well as the province of Rizal.
Meanwhile, Caloocan, Las Pias, Makati, Malabon, Manila, Muntinlupa, Navotas, Paraaque, Pasay, Quezon, and Valenzuela are among Maynilad’s current consumers.
It also serves the cities of Bacoor, Cavite, and Imus, as well as the towns of Kawit, Noveleta, and Rosario in Cavite.
In Maynilad 2020, how much is a cubic meter of water?
Beginning in the fourth quarter of 2020, Maynilad News (Maynilad) will reduce its Foreign Currency Differential Adjustment (FCDA). Maynilad’s tariff has been reduced as a result of a decrease in the FCDA, which is equivalent to P0. 09 per cubic meter (cu. m.) or negative 0.26 percent of the Average Basic Charge of P36.
Maynilad vs. Manila Water: What’s the Difference?
Maynilad provides water to 17 cities and municipalities in the Metropolitan Manila area’s West Zone, while Manila Water provides water to 23 cities and municipalities in the East Zone.
On March 31, Manila Water finalized and signed a revised concession agreement with the Metropolitan Waterworks and Sewerage System (MWSS), the government entity in charge of water privatization in Metro Manila.
On April 18, Maynilad received a copy of the new agreement with Manila Water for approval.
The revised agreement with Manila Water includes changes such as the elimination of the company’s ability to pass on corporate income tax to customers, the cancellation of foreign currency differential adjustments, the lowering of the inflation factor to two-thirds of the consumer price index adjustment, and increases in standard rates for water and wastewater that are capped.
Manila Water’s original rate-rebasing mechanism from the original agreement was also preserved, meaning that the concessionaire’s water and sewerage rates will be set at a level that allows Manila Water to recoup its costs plus a reasonable profit.
Manila Water also agreed to a tariff freeze until December 31, 2022 to help low-income consumers and promote the country’s economic recovery following the coronavirus disease pandemic of 2019 (COVID-19).
President Rodrigo R. Duterte ordered the Department of Justice (DoJ) with reviewing the water agreements in November, claiming that they contain “onerous terms.”
How can you figure out how many cubic meters of water there are in a cubic meter?
For measuring different units, use the cubic meter formula.
- lbh = cubic meters = meter
- lbh10,00,000 = cubic meters = centimetre
- lbh1,00,00,00,000 = cubic meters. Millimetre = lbh1,00,00,00,000 = cubic meters.
- Cubic meters = lbh61,023.8 inches
- Cubic meters = lbh35.315 feet
How can I read the reading on my water meter?
Meters are read using automatic meters, which eliminate the need to enter private property. The new meters have improved efficiencies and lowered estimated reads.
How to read your meter?
It’s akin like reading the odometer on your automobile to read your water meter. From left to right, read all of the numerals. Numbers following the decimal point and numbers with a black background should not be included. In the same way, submeters are read.
Converting HCF to gallons
Every month, PWD measures water consumption in hundred cubic feet (HCF) for billing purposes. However, calculating your usage in gallons is simple.
To figure out how many gallons were utilized, multiply the amount of HCF by 748 gallons.
Example of a meter:
Using your meter to find a leak
Your water meter is an important instrument for water conservation. Reading your meter can help you find leaks in your domestic plumbing in addition to providing you with information about how much water you are consuming.
To check for a leak, turn off all faucets both inside and outside your home. When conducting this task, make sure the toilet is not flushed and the automatic ice cube machine is turned off.
The low flow indicator should not move when the water is turned off. The indicator is a black or red triangle, depending on the sort of meter you have.