they are also fixed on the wall These are usually found beneath the screen and can hold many devices in a number of configurations. The following are some of the benefits and drawbacks of floating wall-mounted cable boxes:
Is it possible to hide a cable box behind a wall-mounted television?
All you have to do is hide the cable box behind the television and ask a friend to change the channels for you. If it’s possible, you can install one side into a stud. When mounting the stud, avoid drilling a pilot hole. Because the 3/16 drill bit appears to be too large for drilling holes into a stud, you’ll need to utilize a mounting screw.
What is the best way to conceal my satellite receiver?
The easiest approach to conceal your TV electronics is to place them behind closed doors in an entertainment cabinet. To watch TV, simply open the doors and close them when you’re done. As long as you remember to close the doors, your satellite or cable reception box, as well as the television, will remain hidden.
What is the best way to conceal my cable box and wires behind my television?
How to Hide TV Wires in Your Walls Without Cutting Into Them
- Hide your wires behind a TV stand using cord clips.
- To keep your wires from touching the floor, use zip ties.
- Use a Cable Management Box to keep your cables organized.
- Use a Raceway Kit for Wall Cords.
- Use a baseboard raceway to conceal your TV wires.
- Use a Fabric Cord Concealer to hide your cords.
Where do you put the cable box for the TV above the fireplace that is located on the wall?
The norm is that the television should be 3 to 7 inches above the fireplace when mounted on the wall. It gives you a wonderful vantage point. Using a wire raceway, you can easily conceal the HDMI wires.
Is it possible to hide my cable box while still using a remote?
Will the remote control work if I HIDE my cable box? When clients want to wall mount their cable box behind their wall-mounted TV, this is one of the most common inquiries we get.
The Basics
To work with cable boxes or set-top boxes like the Apple TV, remote controls employ one of three technologies: Bluetooth, Radio Frequency (RF), or Infrared (IR). There are Wi-Fi-enabled remote controls, but we won’t go through them here.
What are the distinctions among the three? IR works by sending a light (that can’t be seen by the naked eye) to the gadget you’re trying to control. That’s why it doesn’t always function when a substantial object, like as a person, is in the way. Always being the keyword there.
To function, RF requires radio waves that are picked up by the receiver. You don’t need to point your remote straight at the receiver because radio waves don’t require a line of sight, making for a more convenient experience.
Bluetooth uses Bluetooth technology, which is a type of radio wave technology in and of itself. It’s a short-form technique for two gadgets to communicate. It’s most likely what you’re used to seeing on your iPhone or Galaxy smartphone.
Will My Remote Work (If I Hide My Cable Box)?
You don’t need to be concerned if your remote employs Bluetooth or RF technologies because these don’t require line of sight. Your remote should operate well as long as you’re within range of your cable box. Most Bluetooth devices can communicate up to 30 feet away, whereas RF can communicate even further.
The Siri Remote for Apple TV, for example, uses Bluetooth, whereas various universal remote controls use RF. The owner’s manual will tell you if your remote supports either of these technologies.
Now, if your remote uses infrared technology, it will almost certainly work! Continue reading for answers.
So, why does the cable box continue to function even while it is hidden behind the TV? Infrared light can bounce off of walls and other surfaces in the same manner that a laser pointer’s beam can bounce off of mirrors in the case of infrared light.
Now, we can’t speak for everyone’s setup, but we’ve been doing this for 12 years and haven’t had many problems with the remote. However, before you buy, we have one advice.
It’s as simple as placing your cable box behind your television and having someone else try to operate the remote. Bonus tip: stay away from the television’s “brains.”
If your infrared remote isn’t working, we recommend investing in an IR extender. These little receivers are normally connected by USB, which can be plugged into the back of your television or cable box. They’ll set you back roughly $10.
However, you don’t have to take our word for it; we have hundreds of five-star reviews on our website, Amazon, and social media.
We’ve been around since 2009 and get evaluations like this all the time, and we’ve found that the majority of our clients have no issues with their remote functionality. We’re delighted to offer a simple solution for cleaning your TV area and HID-ing that cable box!
When the TV is mounted on the wall, how can I conceal the Virgin box?
When your TV is mounted on the wall, one option for concealing a DVD player or cable box is to just leave them visible. You can also put them on a shelf if you don’t want to display them on the wall.
How do you conceal a television?
Many people have messaged me on Instagram asking where our cable box is. We have a very small mantel with no place for a cable box to be hidden away (our last house had a built in shelf to hide it underneath the tv). I knew I didn’t want cords dangling everywhere, and even if I had, our cable box would never have fit on the mantle. I came up with a tiny hack to hide our cable box to keep things looking incredibly clean and minimal.
I never intended for this to be a long-term solution, but it worked so well that we decided to keep it going. Don’t laugh since this is a ludicrous DIY, but it’s also quite simple to complete! If you’re tired of cable boxes lying on your fireplace or cords dangling from your television, I’ve got the ideal solution for you!
What you’ll need…
I made do with what I had on hand, which happened to be an Ikea folder. I improvised with one of these that I had downstairs. I was planning on purchasing a cable box holder from Amazon, but they were over $80! It would have taken a week or more to get here, which seemed absurd. And I was desperate to get rid of the wires, which had been driving me insane since we moved into our new house. So I took an Ikea folder, chopped off the top part to form a square/rectangle shape, and attached it to the wall above our television with velcro command hooks.
The command hooks had no trouble gripping the painted brick on our fireplace. After putting up the box, I let the command hook cure overnight before plugging in our cable box the next day.
Are you thinking ‘but how am I going to change channels now’??
In order for the pvr or cable box to receive the signal, it only needs to bounce off of something. So the brick wall isn’t ideal; a regular wall would be preferable, but it gets the job done!
If you’re looking for a way to hide your cable box and don’t know where to start, this is the way to go. It’s the simplest little DIY, yet it makes the entire room look so neat and tidy. If you share this hack on Instagram, I’ll repost it in my stories and tag you!
Is it possible to use a remote control through wood?
Your remotes will also function through metal sheeting rather than a wood cabinet door. You may also use an RF remote control device to keep your TV electronics in another room; I’ll include a link at the bottom of this page.
What’s the best way to make my cable box wireless?
It’s time to throw a party now that basketball and baseball season has arrived! You may watch the game on your living room HDTV. But what if you want to watch TV in a different location of your house, such as the garage, game room, man cave, or even the outside while grilling? Is your television connected to that set-top box?
Simply connect a transmitter to your existing set top box in your living room and a receiver to your TV using a wireless video HDMI kit. It’s an excellent choice for those who don’t want to extend cables throughout their home. Instead, wherever you position your TV, you and your friends can enjoy a wireless streaming experience.