Connect the remote to the TV or another device.
- Depending on your remote, press the HOME button twice or the MENU button once.
- Select the Remote Control option.
- Select the device code you want to learn with the arrows.
- Select the device’s appropriate Pairing Wizard.
- Follow the instructions on the screen.
Without the code, how do you connect a DISH remote to a TV?
Follow these instructions to program remotes like the 40.0, 50.0, 52.0, and 54.0:
- Double-click the Home button on your Dish remote. Because the remote type 40.0 lacks a Home button, you can only push the Menu button once.
- Select ‘Remote Control’ from the menu displayed on your screen by going to ‘Settings’.
- Choose the device to which you want to connect your Dish remote.
- From the menu, choose the ‘Pairing Wizard’ option.
- Make sure the gadget you’re trying to connect to your Dish remote is the right brand.
- On the device you want to link with, the pairing wizard will try a few different device codes. Follow the on-screen instructions, which may include tapping the Volume or Power buttons to see if the pairing was successful.
- Select ‘Finish’ on the screen if the pairing was successful. If not, select ‘Try Next Code’ and try again until you get it right.
What is the procedure for obtaining the code for your television?
Look for the code.
- On your Smart TV or streaming device, launch the YouTube app.
- Scroll down to the TV code link. Your television will display a blue TV code.
- Prepare your phone or tablet and follow the instructions in the “Enter the code” section below.
Why isn’t my DISH remote controlling the volume?
DISH remotes have the ability to adjust the volume of your TV and receiver individually, and the fact that you can’t modify the volume is due to this capability.
- Double-click the Home button on your DISH remote. Press the Menu button once if the remote does not have a Home button.
- From the menu, select Settings.
- Select Remote Control > Customizations from the drop-down menu.
- Make sure the Volume & Mute buttons are set to Control the TV’s volume. Set it to regulate the TV’s volume if it isn’t already.
What is the procedure for resetting my DISH remote control?
Unplug your DISH receiver’s power cord (which usually includes a red tag) from the electrical socket for 10 seconds before plugging it back in. It’s possible that the reset procedure will take up to 5 minutes to finish.
What is the code for dish pairing?
Attaching your universal remote to a satellite receiver takes only a few minutes, much like connecting your universal remote to your DISH box.
- On the front of your remote, look for the SAT button. Hold the button down for a few seconds until the other mode buttons light up.
- When the other buttons begin to light, enter the 3-digit remote code 000. This is the code for pairing.
- Press the POWER button after entering the 3-digit code to see if your receiver turns off.
- Everything is programmed correctly if your receiver goes off. To turn the TV back on, simply click the POWER button one again.
- Take a deep breath and repeat the first three steps if the receiver does not turn off after pressing POWER.
Program DIRECTV Genie Remote for your HDTV or audio device
These steps will guide you through the Genie remote’s automatic pairing process. If this method does not work for you, proceed to the manual programming part below.
- Point the remote at your Genie device (Genie HD DVR, Genie Mini or Wireless Genie Mini), then press and hold the MUTE and ENTER buttons until the green light at the top of the remote blinks twice. When the TV is ready to program, it will display Applying IR/RF setup on the screen.
- Turn on the gadget you want to operate using your remote.
- On your remote, press the MENU button.
- Choose Settings & Help > Settings > Remote Control > Program Remote from the drop-down menu.
- Choose the name of the device you want to use the remote to operate.
- To finish programming, follow the on-screen directions.
Program DIRECTV Genie Remote manually for your HDTV or audio device
- Press and hold the MUTE and SELECT buttons until the green light at the top of the remote blinks twice, then point the remote at your Genie device (Genie HD DVR, Genie Mini, or Wireless Genie Mini).
- Enter the code 961 using the buttons on your Genie remote.
- Once, press the channel up button.
- When the TV screen appears, select OK. RF is now enabled on your remote.
- On your remote, press MENU.
Program DIRECTV Genie Remote for a DIRECTV Ready TV
DIRECTV Ready TVs include built-in receivers that work like Genie Minis, allowing you to watch your favorite shows on numerous TVs wirelessly. Follow these instructions to connect your Genie remote to a DIRECTV Ready TV:
- Press and hold the MUTE and ENTER buttons until the green light at the top of the remote blinks twice, then point the remote at your Genie device (Genie HD DVR, Genie Mini, or Wireless Genie Mini). The information will be displayed on the television. When it’s time to program, apply the IR/RF setup.
- Turn on your DIRECTV box. Prepare to watch television.
- Press and hold the MUTE and SELECT buttons on your remote control until the green light at the top blinks twice.
- Enter your TV’s manufacturer’s code here:
- Use the code lookup tool to find the five-digit code for your TV or device if it isn’t mentioned.
- Your DIRECTV Ready TV is now controlled by the Genie remote.
What’s the best way to get my TV remote to control the volume?
Select with the HOME button pressed. In the sound settings menu, select or. Using the remote control of the connected audio system, select to modify the volume.
How can I regain control of the volume on my DISH remote?
The volume of the TV is controlled by default with the DISH remote.
Set the Volume Control Device
- Depending on your remote, press the MENU button once or the HOME button twice.
- Activate the Volume and Mute Buttons.