Make sure the batteries are charged and that there are no obstacles between your remote and the receiver before you begin. Find out more.
Follow these steps to program a replacement remote if your Bell Satellite TV remote isn’t controlling your receiver properly or if you recently acquired one.
Important: If you have a UHF remote (check the bottom of your remote), you must first plug the Bell UHF antenna into the back of your receiver’s antenna connector.
- On the front of the receiver, press SYS INFO.
- Hold down the SAT button until the SAT, TV, AUX, and VCR lights up.
- SAT should be released. It’ll begin to flash.
- Choose a number between 0 and 16 at random and enter it. This will reset the remote’s frequency of communication with the receiver.
- Make a note of it. The number you picked will be displayed in the remote address field on the System Info screen.
- Click the Done button. You’ll be able to control the receiver at this point.
- Find your TV’s remote programming code (PDF 3.41 MB).
- Press and hold the TV button until the SAT, AUX, and VCR lights come on.
- Turn on the television. It’ll begin to flash.
- Press # after entering one of the codes for your TV model. Three times should be flashed on the television.
- Make an attempt to control your television. Use one of the other codes from the list if it doesn’t work.
- Find your device’s remote programming code (PDF 3.41 MB).
- Hold the AUX button down until the SAT, TV AUX, and VCR lights up.
- AUX should be released. It’ll begin to flash.
- Enter one of your device’s codes, then hit #. The AUX button should light up three times.
- Attempt to take control of the other device. Use one of the other codes from the list if it doesn’t work.
You can enter the number 1 as the code in step 4 if you want to utilize a third-party universal remote. When configuring Bell Satellite TV remotes, this is the most frequent setting used by remote manufacturers. If it doesn’t work, please contact the manufacturer of your remote for assistance, since Bell is unable to service remotes that we do not provide.
How can I get my bell remote to control the volume of my television?
How to utilize the Fibe TV remote control’s volume control
- To increase the volume, press vol up.
- To lower the volume, press vol down.
- To reduce the volume to zero, press mute.
How can I pair my bell control with my phone?
- Make sure the path between the remote and the 4K Whole Home PVR is clear. This is only required for the first pairing.
- While directing the remote towards the 4K Whole Home PVR, press any button. Your receiver’s Bluetooth light blinks blue.
- Allow 30 seconds for the pairing of your remote. When your remote is paired, the Bluetooth light on your receiver will turn solid blue.
What is the procedure for obtaining the code for your television?
Look for the code.
- On your Smart TV or streaming device, launch the YouTube app.
- Scroll down to the TV code link. Your television will display a blue TV code.
- Prepare your phone or tablet and follow the instructions in the “Enter the code” section below.
What are the LG TV codes?
Five-digit codes work in the same way that three- and four-digit codes do for remotes that can program them. You can use one of the following codes if you have this sort of remote:
What’s the best way to connect my Dish remote to my TV?
Connect the remote to the TV or another device.
- Depending on your remote, press the HOME button twice or the MENU button once.
- Select the Remote Control option.
- Select the device code you want to learn with the arrows.
- Select the device’s appropriate Pairing Wizard.
- Follow the instructions on the screen.
What’s the best way to program my Bell 4K remote to my TV?
Programming your TV’s remote control Turn on your television as well as your Fibe receiver. 2. Hold the choices key down for three seconds, or until the green light flashes twice. Enter the Ll-digit code for your TV’s brand (see table below) within 10 seconds, or use 0001 to search all brands.
What is the procedure for resetting my bell remote control?
- Make sure your FibreOP TV receiver is turned on.
- Place your FibreOP TV remote in front of your television.
- For 3 seconds, press and hold the OPTIONS button until the green TV light blinks twice.
- Using the number buttons on your remote, dial 0000. You have 10 seconds to enter the code.
- The remote has been reset to factory defaults.
Note that no television is programmed from the factory. To operate the volume and power button on your TV, you’ll need to reconfigure your remote.
What is the remote control code for my television?
Call the manufacturer of your remote and see if they can provide you with the numbers you require. Have the complete list of codes emailed to you. Make sure you notify the manufacturer whatever type of remote you have. On the inside of the battery clasp is the model number.
Without a code, how do you program a TV remote?
Without codes, programming a universal remote is simple. The steps are as follows:
- On the TV you want to link to the remote, press the ‘Power’ button.
- Hold down the ‘LED’ button until it illuminates.
- Press the ‘TV’ button on the remote. The light should blink once before remaining on.
- While aiming towards the TV, press the ‘Power’ button.
- Keep your hands in this posture until the TV switches off.
- To begin, press the ‘Enter’ key.
The light from the LED light will now be turned off. If this happens, your TV’s remote has been successfully programmed. If you wish to program TV remotes, this is the simplest method to use.