This software allows you to see if there are any obstacles in the path of your dish, such as trees or buildings, before you place it. This app is not designed to assist you with aligning your dish.
Dish Network satellites 61.5w, 72.7w, 77w, 110w, 118.7w, 119w, and 129w are supported.
This is accomplished by overlaying all of DISH Network’s residential satellites as dots in the sky on the iPhone’s built-in video camera.
Simply point your iPhone at the southern sky to observe what’s happening on the live video screen. As you move the video camera about, the DISH Network satellites will appear as red dots, allowing you to quickly and easily assess if there are any obstacles in the way, such as trees or buildings.
Features
- Watch the satellites move on the screen in real time with live video.
- It can be used anywhere!!! There is no need for mobile service or Internet access.
- It’s easy to use and doesn’t require any technical knowledge or setup.
Supported Devices
ATTENTION: This software is only compatible with the devices listed above and will not operate on iPhones older than the 3GS.
This software is intended to assist you determine if satellite reception is possible at your current location, not to help you align your dish.
The iPhone’s inbuilt compass is used to help find satellites in the sky when running this app. It is critical that this software be used outside, away from any things that could interfere with the compass. The satellites will travel erratically if there is any compass interference. Any object that can generate magnetic interference should not be used with this software.
Is there a Dish Network satellite locator app?
Dish Align is a basic yet effective tool for satellite dish alignment. It allows you to select the exact location of the dish as well as the required satellite, and then tells you how to orient the dish for proper signal reception.
What is the best way to point my Dish Network dish?
How to Put a Dish Network Dish in the Right Place
- Prepare your signal meter screen.
- Examine the location where the Dish Network satellite dish has been installed.
- The Dish Network satellite should be pointed to the south.
- Adjust the Dish Network satellite’s elevation.
- Adjust the Dish Network satellite’s azimuth.
What is the best way to utilize my phone as a satellite finder?
Simply raise your phone to the sky while the app is running to find the nearest TV satellites. It will show you where all the satellites are in the real world as seen through your phone’s screen, so you can check if a tree or structure is blocking the signal.
What is the best app for finding satellites?
Detector for the International Space Station RunaR has created the ISS Detector, a free app for Android and iOS smartphones. Users may track ham and weather satellites with the app, which includes radio frequencies and Doppler shifts for most spacecraft.
Without a meter, how can I align my dish satellite?
The NFL season openers and salted caramel popcorn beckoned, and I had already stocked the minibar with beer.
Rain and snow are the typical suspects, but the beautiful sky that evening allowed me to practically see the stars.
To get the signal back on my TV, they rotated the dish a degree to the left and another upwards!
The problem could have been fixed with no fancy meters or tools, yet they charged me for the whole cost of diagnosing and repair, which took less than ten minutes.
As a result, I learned more about dish alignment and signal strength so that if calamity strikes again, I won’t waste time or money hiring professionals.
I aspired to be a first responder, and this post provides all I’ve learned about determining signal strength without using a satellite meter.
To locate a satellite signal without using a meter, rotate your dish for horizontal adjustment, then vertical adjustment for elevation. Work with a partner who can keep an eye on the television’s signal strength.
What is the best angle for a satellite dish?
Whether you’re using a free-standing or roof-mounted satellite dish, you’ll need to make sure you’re in a place free of trees or other impediments before you can align your system. Receiving a strong enough signal for trouble-free viewing requires a clear line of sight between the satellite and your dish.
The first step in setting up your dish is to point it south to southeast, which you can do with a compass or by looking at the position of the sun (B2022).
The satellite’s orbital position is 28.2 degrees East of South, but the actual compass bearing is slightly different. You’ll need to know the magnetic variation of the continent you’re on to figure out the correct compass bearing. The required variance for the United Kingdom is roughly 5 degrees, which means you’ll need to position your dish to a compass bearing of about 23 degrees east of south.
Now that you’ve got the dish roughly aligned with the compass bearing from left to right, The second step is to vertically position the dish. The correct dish elevation will vary depending on where you are in the world. The elevation for the majority of the UK is between 21 and 27 degrees. A ‘Zone Map’ is included with each Maxview satellite dish kit. The ‘Zone Map’ will give you a rough idea of what elevation you’ll need to place the dish to.
You should only need to fine-tune these settings to get an image now that the dish is roughly aligned with the compass bearing and elevation angle.
The employment of a ‘Sat-Finder’ (B5029) can also aid in the detection of satellite signals. As you move the dish, the ‘Sat-Finder’ will offer you an audio indicator of signal strength.
Using the “Signal Test menu” incorporated within the Sky Digital Decoder can also help with proper dish alignment, especially when it comes to finding the correct satellite. You must ‘push’ the “Services button on the Sky remote to reach this menu. After that, go to the “SERVICES menu and select “SYSTEM SETUP (number 4) then “SIGNAL TEST” (number 6).
Signal Strength, Signal Quality, Lock Indicator, Network ID, and Transport Stream are all indicators of how strong a signal is.
To get the digital meter in the satellite receiver to respond correctly, move the dish in slow discrete steps. For more information, reference the manufacturer’s instruction manual.
Alignment is crucial, and the dish must be aligned until at least a quarter of the ‘Signal quality’ bar is visible. When the signal quality is sufficient, the ‘Lock indicator’ will display ‘OK.’ The ‘Network ID’ for the Astra 2 satellite should be “0002,” with the ‘Transport Stream’ set to ’07d4.’ If the ‘Network ID’ displays any other information, you have locked onto the incorrect satellite and must re-align the satellite dish and reset your Sky decoder. When you get a clear signal, be careful not to alter the dish location when tightening the dish mounting bolts or clamps.
The Astra 2 satellite cluster’s programs are “beamed down” to form three “Footprints,” north, south, and UK. These “footprints” receive all of the Free-To-Air and Sky programs: The most up-to-date list of programs available on each footprint can be found at (WWW.ASTRA.LU)
What is the best way to angle my directv dish?
You’ll need to know your azimuth and elevation coordinates to aim your dish. The left-to-right alignment of your dish is referred to as azimuth. The up-and-down positioning of your dish is referred to as elevation. Your DIRECTV receiver is set up to provide you with these coordinates and assist you in pointing your dish.
What’s the best way to find a satellite location?
Google Maps satellite view is progressive, but it doesn’t provide the in-depth detail that Google Earth provides. Unlike Google Maps, Google Earth allows you to zoom practically to ground level. Google Earth not only provides higher-resolution satellite imagery at a much higher zoom rate, but it also allows you to see how the area has changed over time.
What is the best direction for my DISH Network dish to face?
The dish must be aimed in the direction of the satellite for the system to work. It’s quick and easy to get the right coordinates from the receiver.