- Find the set-top box (cable box) and the outlet where it is plugged in.
- Only disconnect the power cord from the power source.
- Allow one minute to pass without being plugged in.
- While it’s unplugged, double-check that all of the other connections to the Set Top Box are secure.
- Reconnect the power cord to the outlet.
- It will take roughly 4-5 minutes for the Set Top Box to fully turn on again.
- Stay below channel 72 during the first 20 minutes as the Set Top Box reboots and loads information back into it.
What is the procedure for resetting my Buckeye cable remote?
Reset infrared (IR) The following procedure can be used to reset the specified TV IR codes to their factory defaults: Hold down the SET button until the LED light on the remote becomes white. Two blinks of the white LED light indicate successful programming.
What is the best way to link my Buckeye cable to my television?
HD Boxes come with a variety of connections, but HDMI is the best option for connecting to your TV.
The power wire, the incoming cable, and the exiting HDMI to the TV are the three most critical connections on the HD STB (Set Top Box aka Cable Box).
The HDMI connectors on both ends of the cord are used to connect your cable box to the TV. Connect each end of the HDMI cable to the appropriate spot on the cable box and the television.
If you don’t have an HDMI cable or an HDMI input on your TV, you can connect the cable box to the TV using COAX.
One cable runs from the “TO TV/RF OUT” place on the cable box to the “CABLE/ANTENNA” spot. At each location on the cable box and TV, tighten the coax cable.
How can I program the TiVo remote on my Buckeye cable box?
To program your TiVo remote, go to TiVo Central by pressing the TiVo button, then Settings & Messages > Settings > Remote, CableCARD, & Devices > Remote Control Setup. Follow the simple directions on the screen. There are two thumbs up and two thumbs down. For TiVo Suggestions, rate shows, collections, or video sources.
What exactly is the Stream TV app?
The Stream TV is an Android TV device that includes Netflix, Disney+, Amazon Prime Video, and Hulu, as well as Google Chromecast and Google Assistant. The initial Stream TV was released without Netflix last year, but Verizon added it earlier this year.
How do you re-start your television?
Try a power reset if the power cord is accessible.
If that isn’t the case, try one of the restart choices.
- Unplug the TV power cord from the wall outlet, then wait two minutes before plugging it back in.
- With the included remote control, turn on the television:
- Hold down the POWER button until the message “Power off” displays on the screen.
- Hold the POWER button down until a menu appears, then pick Restart
- Restart the menu system. Using the remote control:
- (Quick Settings)SystemRestartRestart (Quick Settings)SystemRestartRestart (Quick Settings)SystemRestartRestart (Quick Settings)
- Navigate to SettingsAboutRestartRestart by pressing HOME.
- To return to the main menu, select HOME.
- go to the Settings page
- Preferences for the Device
- About
- RestartRestart