Can You Use Galvanized Pipe For Natural Gas In Ontario?

We’ve used a natural gas-powered pool heater for the past seven years. This year, it stopped working owing to severe overheating issues that melted some of the circuit board and electrical components. As a result, we’ve decided to replace it with another unit. The flexible gas pipe was connected to the old pool heater using a set of connections.

galvanized pipe and normal iron pipe This, according to our pool heater installation company, would cause issues with our new heater. Our plumber stated that utilizing the galvanized fitting alone or in combination with the iron fitting is not a problem. Who is correct?

Is it possible to run natural gas through galvanized pipe?

Because of the galvanized coating, you should not use galvanized pipe for gas. Galvanized steel bits will flake off over time and block your gas regulators and burner units. If you mix galvanized and black iron, corrosion will be accelerated where they come into contact.

In Canada, can you use galvanized pipe for natural gas?

Re: Natural Gas Piping with Galvanized Pipe Galvanized steel is illegal in Ontario, Canada. Black malleable iron, copper, or “gastite” or a comparable substance can all be used.

What type of natural gas pipe is utilized in Canada?

Many households in the northern half of the country will have to turn on their heating systems at the beginning of October. Natural gas is one of the most cost-effective and efficient fuels for a furnace or boiler. With its benefits come questions about safety and obligations for homeowners. It is your role as a home inspector to assist in the detection of flaws that may jeopardize the safety of residents in natural gas-powered homes. We’ll go through some of the fundamentals of gas piping inspection.

The gas supply line, also known as the building line, is the plumbing that runs throughout the house. Individual appliances are served by branch lines. The branch line finishes in a drop line, which is a vertical pipe that drops down from an overhead branch line to the appliance. If it carries gas up to an appliance from a branch line below the appliance, it’s called a riser.

A sediment trap or dirt pocket, commonly referred to as a drip leg, is normally present at the appliance connection point and consists of a nipple and a cap. This pipe extension, which is normally at least 3 inches long, is designed to catch any water or foreign material that may be present in the gas before it enters the appliance. The solids and liquids fall into the pocket, which is just a gravity mechanism.

The homeowner is normally responsible for the pipework downstream of the gas meter. The gas company is normally responsible for the piping upstream of the gas meter, as well as the meter itself.

Steel, copper, and brass are the most popular materials for gas piping. In some cases, galvanized steel, copper, brass, or CSST (Corrugated Stainless Steel Tubing) can be used, but copper is prohibited by some utilities. Copper is widely used in different parts of the world. You should be aware of what is considered acceptable in your neighborhood. Black steel piping with malleable iron or steel fittings is common. In other cases, galvanized steel is also used.

Flexible connectors are allowed to be used to connect appliances to gas pipelines. A shut-off valve must be installed at the rigid piping connection. This valve must be located in the same area as the appliance.

Accessible and three or six feet long: The flexible connectors cannot pass through walls, floors, or ceilings, and they cannot be hidden. Except for gas stoves and laundry dryers, the flexible connector length is normally limited to 3 feet. 6 feet is usually allowed for these equipment. Using nipples to splice or join connectors is frequently forbidden. Flexible connectors are only allowed in some jurisdictions for gas stoves, dryers, outdoor barbecues, and other semi-portable equipment. Flexible connectors may be prohibited on gas furnaces, water heaters, space heaters, and other similar appliances. Flexible connectors are more likely to be utilized on all appliances in earthquake-prone areas because they give some protection against gas piping leakage or rupture during an earthquake. To find out what is and isn’t permitted in your area, consult your local gas code.

The use of white thread seal tape (often referred to as Teflon tape) as a connecting compound for steel gas piping is not recommended. Cutting oils on the pipe threads from the manufacturing process may hinder the tape from sealing. Yellow thread seal tape is permitted in some regions. Pipe dope is favored and may be the only option available. You might wish to double-check with the gas company. Inquire about whether any piping installations with thread seal tape of any color should be reported as a defect.

Although certain exceptions exist, most appliances should have a shut-off valve nearby.

The use of gas piping as a grounding mechanism for the electrical service is prohibited by most authorities. In many countries, however, bonding the gas piping to the electrical grounding system is required. This is often accomplished by connecting the gas pipe to the supply water piping (assuming it is grounded) near the water heater. We want to keep the gas piping at zero electrical potential by attaching it to the grounding system to prevent an electrical potential building within it that could lead to arcing, which could ignite gas.

All of these issues have the potential to result in gas leaks and explosions.

Carson Dunlop’s home inspection training program is the only certified college dedicated solely to house inspection training and is designed to ensure your success. For more information about Carson Dunlop’s home inspection training program, click here.

What type of natural gas pipe should I use?

CSST tubing, also known as corrugated stainless steel tubing, is ideal for gas appliance installation. Because these corrugated pipes can bend around curves, fewer joints and fittings are required.

What kind of natural gas line is used outside?

Steel, black iron, polyvinyl chloride (PVC), high-density polyethylene (HDPE), and copper are the most popular materials used to build gas piping. Some of these materials are prohibited by some utilities, so check with your local utility to see what is permitted in your region before installing any. If you employ a professional to complete the task, they will be familiar with the local regulations.

Flexible Corrugated Stainless Steel Tubing

Corrugated stainless steel tubing is flexible and easy to install, and it works well in compact spaces and areas with a high risk of natural disasters. Flexible corrugated stainless steel tubing can crack over time, despite its ability to reduce damage. This material should only be used for indoor gas piping.

Galvanized Steel

Galvanized steel gas pipes are both energy efficient and long-lasting. Galvanized steel pipes are suitable for water supply lines since they may be used for both interior and outside gas lines. Because it is labor-intensive compared to other materials, this material is commonly found in older homes and is not used in new structures nowadays.

Black Iron

The most frequent material used to manufacture gas pipes, both inside and outside, is black iron. The substance is durable, heat resistant, and can be molded into an airtight seal. Black iron, on the other hand, can corrode and its sealant erode over time. Consider contacting a professional for routine maintenance if your gas pipes are constructed of black iron.

PVC

Because PVC gas pipes are sturdy and corrosion-resistant, they’re ideal for underground outside gas lines. Although PVC pipes are a cost-effective option, some places do not allow them since they can break during installation.

HDPE

HDPE pipes, like PVC pipes, are appropriate for buried outside lines. Although these plastic pipes are flexible and affordable, they can be damaged by subsurface material such as rocks and tree roots.

Copper

Some towns do not allow copper gas lines, therefore their use is limited. Copper pipes have severe code requirements that limit their use due to their estimated life of 20 years.

Is black iron pipe suitable for natural gas?

We started selling a selection of black iron pipe and fittings on our website earlier this year. Since then, we’ve discovered that many customers are unaware of the benefits of this fantastic material. Simply said, black iron piping is one of the greatest gas line solutions available. It’s sturdy, simple to install, corrosion-resistant, and maintains an airtight seal. Corrosion is slowed by the black coating.

Black iron pipe was once common in water lines, but since the introduction of copper, CPVC, and PEX, it has become much more common in gas lines. It’s a fantastic alternative to gas for two reasons. 1) It is sturdy, and 2) it is pretty simple to assemble. Black malleable iron, like PVC, uses a system of tubing and fittings that are joined with compounds rather than welding. Black iron pipe is really built of a low-grade “mild steel” composite, despite its name. This makes it significantly more resistant to corrosion than ordinary cast iron piping.

In Canada, can I use copper tubing for natural gas?

1 If the gas includes more than 0.3 grains of hydrogen sulfide per 100 standard cubic feet of gas, copper alloy tubing should not be used (0.7 milligrams per 100 liters).

Is PEX suitable for gas lines?

PEX pipe is not the same as PE piping, and the two are frequently confused. Polyethylene, or PE, is a flexible plastic polymer that is ideal for piping in wells and other cold-water supply lines.

PEX stands for polyethylene that has been cross-linked. It’s made of polyethylene, a material with a stronger link between the polymer chains that make it up. PEX is now suited for both hot and cold water applications as a result of this advancement. It can also be utilized in some gas applications, depending on the building code.

PEX and PE are more flexible and have a significantly greater pressure rating than typical gas lines, thus they suit those requirements. They are, however, made of a soft material that could be damaged by nails, rodents, and other objects. As a result, in your location, either may not be permitted for use as a residential gas line. Even when the utility provider is able to install it, plumbers and homeowners are not always able to.

In Ontario, can copper pipe be used for natural gas?

Nothing, including copper, is corroded by natural gas. Corrosion is a chemical reaction that occurs when metal and oxygen come into contact. Any corrosion would be caused by the oxygen in the normal air that is mixed in with the gas. Heat and moisture can also hasten the rusting process. Is it conceivable that the pipe was clogged by humidity or water? Sorry, but I don’t have any information about gas pipe specifications! I strongly advise you to use whatever material is current under California law. Natural gas leaks aren’t something you want to take lightly.