It is dependent on the log set type. Some vented gas log sets, but not ventless gas log sets, can be converted from propane to natural gas.
You can convert your vented propane log set to natural gas with a gas conversion kit, however the conversion kit must be certified by the manufacturer first to ensure a safe installation.
Please keep in mind that the guarantee on a gas log set only applies to the original owner and the fireplace in which the log set was installed.
After prolonged usage, gas logs can grow brittle and break, and this would void the guarantee if it happened outside of the original conditions.
Is it possible to use propane gas logs in a natural gas fireplace?
Natural gas or liquid propane are used to make gas logs. Because these two gases burn in different ways, the burner systems you utilize must be designed particularly for the gas you’ll be burning. As a result, you can’t use a Liquid Propane burner with a Natural Gas burner or vice versa.
Is it possible to convert a propane gas fireplace to natural gas?
Because you don’t have to start from scratch, changing a propane fireplace to natural gas is rather simple. Many propane fireplace manufacturers offer conversion kits that make the process quite straightforward.
What is the cost of converting a propane fireplace to a natural gas fireplace?
It differs. Is it necessary to connect to the underground manifold? Or do you have natural gas in your home and merely need a new connection or extension? When broken down, the cost is as follows:
- The cost of installing a new gas line ranges from $0 to $2,000, with an average cost of $980. The gas provider MUST take care of this. If you have a pre-existing relationship with the community and gas provider, or if the distance from the line to your property is minimal, the hookup can often be free. Your home, however, will not be able to run on natural gas without a connection to the manifold.
- A line extension costs $256-$792 for a home connected to natural gas, whereas adding a new gas line from the meter costs $500-$2,000+. Extending a gas line is a common practice for adding more appliances. You can extend the gas supply to your home by adding a line to the gas meter. If you’re installing many gas appliances or systems, this may be necessary.
Is it possible to convert any propane gadget to natural gas?
On 2020-12-07 by (mod)- What parts would I need to convert a Whirlpool stove from LP to natural gas? WFG320M0BW0 Mod#
You’ll need to convert the regulator itself, which may require merely flipping it over or replacing an internal part, or a regulator may need to be replaced on some appliances. In addition, each burner will require the replacement of a gas orifice. Each gas burner control may also need to be replaced or adjusted.
What parts would I need to convert a Whirlpool stove from LP to natural gas? WFG320M0BW0 Mod#
Is it difficult to go from gas to propane or vice versa, as stated by (mod) on 2020-11-21?
You pose a completely logical question, but one that no rational person would be able to answer for a stranger.
What was simple for a trained heating service specialist could be quite complex for a first-time homeowner.
If you can obtain the right parts and the originals aren’t too corroded in situ and can be removed without stripping the fittings, this could be a rather simple job for some people.
When an older model stove is converted from liquid propane to natural gas, how difficult is it to do so?
Most people (except me) don’t hang on to the LP or Natural gas jets or orifices that they removed when converting the appliance, so I’m not optimistic about finding a part for an older appliance by posting a request on one of the auction sites that will then notify you when someone offers that part for sale.
So, if you can’t get the exact-right parts from a manufacturer or source, you might have to resell your used Maytag LP-fueled stove; if you do, make sure the buyer understands that it’s only set up for LP use.
I recently bought a Maytag stove that was previously used on LP and need to convert it to natural gas!
Although I was given guidance and a kit, I was advised that the oven and broiler jets/ports had been discontinued??
The ZANUSSI DUAL FUEL GAS RANGE MANUAL for models ZCG63010BA, ZCG63010WA, and ZCG63010XA is available as a PDF download.
1. Connect the Rapid injector to the pressure gauge.
2. Check the supply pressure by turning on and lighting the Rapid burner and one other burner.
Most, but not all, LPG appliances can be changed to natural gas; ask your cooker’s maker for a gas conversion kit and follow their instructions. Typically, one or more gas orifices are replaced, and the regulator is changed or modified.
Because equipment, gasoline prices, and availability vary so much between countries and within countries, there is no clear “correct solution” to your query, Larry.
People use natural gas, which is piped in from a utility, in almost all jurisdictions where it is available.
However, many property owners should consider equipment expenses, initial installation costs, costs to buy or rent an LP tank, costs for piping and meters, and other economic concerns.
I’m not sure whether I should go with natural gas or propane. When, based on price and btu demand, is one a better value?
Stove is 30 years old and made of black porcelain. Finding a gas fitter who will really show up to convert from propane to gas is proving difficult.
This is a lovely vintage black porcelain stove. On the back plate, it states propane 82-400 and gas 82-1300. 0-1375m orfice bray says Different gas fitters claim to be able to handle the task, but then appear to avoid it. In the Kawartha Lakes, I signed cold.
Mark Although I lack competence in this area, I believe that if the opening is too large, the air-gas mixing will be inaccurate, resulting in sooting – which is dangerous due to the increased chance of carbon monoxide production – a possibly lethal mistake.
If this happened to you, you should turn off the heater right once, consult the manufacturer for instructions, and have the entire system, including the chimney or vent, cleaned and examined for safety.
What can go wrong if the contractor installs the improper size gas orifices when converting a 90,000BTU furnace from natural gas to LP gas (propane)?
For example, if the correct LP Gas orifice is size 1.15 (.0453 dia), what could happen if he placed size 54 (.0550 dia) instead?
Is it possible that it will produce a lot of soot and eventually jam the heat exchanger?
How can I tell if my gas logs are propane or natural gas?
The most critical step in purchasing a new fireplace is determining the sort of fuel you wish to use. If you choose a gas fireplace, the next decision is whether to use natural gas or propane gas. When you’re looking at fireplaces in person, it’s simple to find out. Shopping online, on the other hand, will be a little different. We’ll show you how to figure out which fuel a fireplace utilizes in this article so you don’t waste time looking at one you can’t use.
The quickest way to tell what fuel a fireplace burns while you’re in person is to check at the serial tag or rating plate. These tags are frequently attached to or hung from the fireplace. Remove the faceplate by looking towards the bottom of the fireplace. There will be a tag on the gas valve or a label on the bottom of the appliance on the inside. That is where you will learn whether the fireplace is a natural gas or propane gas fireplace. Natural gas is denoted by the letters NG or Nat, while propane is denoted by the letters LP.
You can also consult the owner’s manual if you’re unsure how to open the faceplate or access panel to display the build tag. Both forms of gasoline will be covered in the owner’s manual. Some manufacturers will adhere a fuel type label to the manual sent with your fireplace if you look at the front of the booklet. The instructions will then tell you everything you need to know about your fireplace’s fuel, operation, and usefulness. If you’re doing your purchasing online, this will be a simple process. The sort of fuel used by a fireplace is usually indicated by its name. Before you buy or switch the fuel type on a gas fireplace, it’s critical to understand what type of fuel it utilizes. Not everyone will have easy access to natural gas, and utilizing propane gas may be inconvenient depending on how your fireplace is set up.
In other cases, depending on the type of fireplace you have, moving from one gas to another may not be possible. Before making any major alterations, you should always contact with a professional installer. Please call our NFI certified technicians at 800.203.1642 if you have any queries concerning gas fireplaces.
Is it possible to replace the wood in a gas fireplace?
Is your ancient natural gas fireplace resembling anything from the 1960s, but not in a trendy “vintage” way? The good news is that you don’t need a major overhaul to have your fireplace in working order. Replacing the logs, on the other hand, can change your tired-looking gas fireplace into a smart, modern one that gives warmth while also complementing your decor.
Gut check
Is it possible that your gas fireplace logs are composed of plastic? Do your logs produce a feeble flame instead of a roaring fire? It’s probably time for a fireplace “gut” check if your home is more than 10 years old and still has the “builder grade” log set that was installed when it was built.
natural gas fireplace the reboot it needs.
Gas fireplaces, like any other home device, require regular maintenance. The good news is that if you want to increase the function or aesthetics of your fireplace, you don’t have to replace it entirely. Simply replacing the logs can give your fireplace a much-needed makeover.
Ceramic logs for gas fireplaces have improved through time to the point where they now closely resemble genuine wood. They have cut markings and branches on them. When heated, they glow red, just like genuine logs, and have a charred appearance.
Log logistics
You’ll need to know what kind of gas logs you’ll need before you go shopping. You’ll need to know the difference between vented and vent-free gas logs.
Vented: Vented gas logs are ideal for those who want a roaring fire but only need a limited quantity of radiant heat. These log sets produce tall, golden flames that mimic the appearance of actual wood logs.
The cost: Vented gas logs are only suitable for use with a fully functional chimney. When these logs are burning, the chimney damper must be open to prevent the buildup of dangerous combustion byproducts. Because an open damper enables nearly all of the generated heat to escape up the chimney, this log alternative is inefficient.
Vent-free (or ventless) gas logs provide a clean, smokeless flame and may be used with the damper closed, so they don’t require a chimney. The air from within the room is used to burn these logs. Rather from escaping up the chimney, all of the heat produced is recirculated back into the room. As a result of this efficiency, less natural gas is consumed.
The disadvantage is that the fire produced by a vent-free log set is less realistic than that produced by a vented log set. When using vent-free logs, some people experience an odor connected with burning. Because those with allergies and asthma are the most sensitive to these aromas, it is recommended that when utilizing vent-free gas logs, a window or door be cracked.
Q:What are today’s gas logs made of?
A:Most gas logs are constructed of a high-temperature-resistant ceramic fiber or refractory cement mixture. Steel reinforcement bars are sometimes inserted into the inside of the logs to strengthen their strength and prevent them from bending or splitting when exposed to high temperatures.
Ceramic fiber logs may change color slightly over time, while refractory cement logs are exceptionally durable and will hold their color and details for much longer.
Q:Why are newer gas logs more realistic looking?
A:To capture the distinctive features of wood seen in nature, they are individually cast from actual tree samples or manufactured from extremely detailed molds. To create an authentic-looking reproduction, refractory cement logs are hand-painted to further define the wood’s marks, pitting, and coloring.
When looking for a new log set, you’ll note that there are a range of simulated woods to choose from, such as red oak, golden oak, or juniper.
Q: How long do gas logs last?
A: A well-maintained vented log set with ceramic logs will last 10 or more years in the ordinary home. A well-maintained vent-free log set with ceramic logs can also last a long period, although it will begin to wear after 3-5 years if it is used frequently.
Q:Do gas logs require maintenance?
A:Gas log sets do not require daily maintenance, however they should be inspected by a specialist once a year. Inspect logs for cracks and breaks, and replace them if they are not in good shape. Inspect valves, pipes, and gas connections to ensure they are in good working order.
Clean the ember bed and logs in vent-free log sets to remove any accumulation. If you use vented gas logs, your chimney should be inspected and swept once a year as well.
Q:I see that logs come in different sizes. Does the size I get matter?
A: Improperly proportioned logs can cause irreparable damage to your log set, fireplace, or home by overheating the firebox and gas valves. To figure out what size gas log set to acquire, measure the firebox of your fireplace. Simply take measurements of the firebox’s front, back, depth, and height. Before purchasing a log set, verify the manufacturer’s sizing specifications and suggested clearance to combustibles to ensure you acquire the right size.
Q:Is there any way to enhance the look of my gas logs?
A:You can add a number of gas log accessories to make your fire more realistic, but check your owner’s manual first to guarantee proper positioning without interfering with the gas log burner’s performance or jeopardizing its safety. Here are a few accessories designed specifically for gas fireplaces:
- Embers are fuzzy clusters that react to the flame and give a wood-burning fire its blazing effect.
- To simulate a coal bed, lava rocks can be placed on the fireplace’s floor. They can also store and emit heat.
- Ceramic pine cones available in a variety of sizes and forms to add personality to your fireplace.
- To add quirky flair, scatter acorns made of refractory cement on the fireplace floor.
Q: Can I add a remote control to turn on/off my gas log set?
A: You can add a remote to your existing log set if it has a millivolt valve. You could even be able to turn your gas log set into a remote-controlled system with variable flame and thermostatic settings.
Is it propane or natural gas that has the larger orifice?
Appliance conversion entails replacing gas orifices, burners, and/or appliance regulators in order for an appliance to run on a different fuel. These internal fittings and gas usage connections are made to work with a certain gas at a given pressure. Because natural gas has a lower pressure than propane, changing the appliance to one of the two gases necessitates compensating for the pressure difference. Connecting a natural gas appliance to a propane piping system, in other words, will result in appliance failure and possibly danger. This is due to the fact that natural gas orifices are larger than propane orifices due to gas service pressure. In this situation, the greater pressure gas passing through a wider orifice will cause more gas to pass through the burner, resulting in more flame…an unnaturally enormous flame. Because of the lower pressure gas and the smaller orifice, using a propane device with natural gas will likely result in a very small flame or no burner flame at all. This is the primary goal of converting a propane to natural gas or natural gas to propane equipment. Furthermore, appliances cannot be switched from electricity to propane or the other way around.
Natural gas or propane: which is less expensive?
Cost. If you pay $15.00 per 1,000 cubic feet for natural gas, you’ll get roughly one million BTUs, which is little more than 11.20 gallons of propane. Using this example, if propane costs $2.50 per gallon, natural gas is the less expensive option.
What’s the difference between natural gas and propane burners?
The price of propane and natural gas varies per month depending on the fuel market. And where you reside might have an impact on the price; natural gas is more expensive in some locations than electricity, and vice versa. If your home’s systems are already on natural gas, such as the heat, water heater, stove, or dryer, it makes sense to connect your grill.
A 20-pound gas tank should cost between $40 and $50. Then you have the option of either refilling it which is only available at certain locations or exchanging it for a full tank which is available at most large grocery, hardware, and big box shops, as well as some gas stations. Expect to pay $3.00-$4.00 per gallon to refill or $4.00-$5.00 to swap it. Natural gas is charged per therm and ranges from $.50 to $2 per therm, plus any monthly maintenance or administrative fees.
Of course, rates differ greatly depending on geographic region and even season.
If you have the choice, do your homework and choose the most cost-effective and handy fuel source.
Another cost consideration: a propane gas barbecue requires no installation fees, but if you’re using natural gas, you’ll have to pay for the installation of a gas line into your backyard. You’ll need to employ a gas fitter to perform this because you won’t be able to do it yourself.
Finally, because a natural gas grill requires a longer gas hose (10 vs. 1 on a propane grill), the price of your grill will be slightly more at the time of purchase.
Bottom line: unless you’re cooking in the arctic, there’s no performance difference between propane and natural gas. The only significant difference is that natural gas is more convenient and never runs out of fuel. Your decision is ultimately determined by the fuel sources available to you and the costs in your area.
Is it better to use vented gas logs or non-vented gas logs?
- Because there is no need to renovate in order to run a flue, ventless fireplaces are less expensive to install than vented fireplaces.
- As opposed to wood-burning fireplaces, ventless fireplaces do not emit soot and ash.
- Ventless fireplaces can be placed in any area of the house, providing additional heat exactly where you need it.
- The flames from ventless fireplaces create just as much atmosphere as those from vented fireplaces.
- Because no heat escapes up the chimney, ventless fireplaces are more energy efficient than vented fireplaces, resulting in lower gas utility bills. Because some of the heat escapes down the flue, a vented gas fireplace consumes more gas to achieve the same degree of warmth.
Cons
- Despite emitting significantly fewer pollutants than vented gas fireplaces, a small quantity of fumes will enter your home.
- In some localities, ventless fireplaces are prohibited. If you install one in a location where it violates local building codes, you may be ordered to remove it and punished for violating local construction codes.
- A little amount of water vapor is produced during gas burning, which can make your home feel humid or muggy.