What Is BP Number In Chhattisgarh Electricity Bill?

Electricity / By

Business Partner number (BP number) is a 10-digit identification number supplied by CSPDCL to each of their customers to identify them individually.

In Chhattisgarh, how can I check my electricity bill?

Go to the ‘Payment of Recharges and Bills’ section. Choose CSEB as an operator by clicking on Electricity. Fill in your account information. The status of the CSEB bill payment will be shown.

What does ASD stand for in a CG electrical bill?

Also see: Does your apartment have a STP and a fire hydrant? This is the maximum amount BESCOM can charge.

BESCOM has sent notices to various residential complexes on Bengaluru’s Sarjapur Road, requesting payment of an extra security deposit. In one case, the notice said that the existing deposit was Rs 47,120, but the computed MMD (Months Minimum Deposit) was Rs 1,43,690, requiring a payment of Rs 96,570 to BESCOM to avoid disconnection.

At the time of establishing a new connection, BESCOM collects a security deposit from all of its customers. The initial security deposit is a set amount determined by the quantity of power required by a customer. This sum is normally determined on the average bill amount equal to two months in the case of monthly billing, and four months in the case of bi-monthly billing, beginning the following year.

According to BESCOM sources, the security deposit is similar to the minimum balance deposit collected by banks or the deposit collected by landlords from tenants prior to renting a home, and that it was necessary to collect this money to protect itself from customers who did not pay their electricity bills on time.

Consumers are normally given 30 days to pay their bills, according to BESCOM. A 15-day grace period is added on top of that. Even for people who did not pay their bills on time, the connection was often not cut for 45 days, which was another reason why it was critical that the security deposit be collected.

The security deposit that BESCOM requires from a customer at any one moment is equal to two months’ invoicing. For example, if the average bill amount for two months is Rs 1,500, and monthly billing is approximately Rs 750, the security deposit that a consumer is required to pay BESCOM is Rs 1,500 (7502). If the monthly billing value climbs to Rs 950 the next year as a result of a unit price increase or an increase in power use, the security deposit should be Rs 1,900 (9502). BESCOM then sends a notice to the consumer, requesting that he pay the difference, in this example Rs 400, in order to make up the shortfall. This is the ASD amount that can be found at the bottom of a consumer’s power bill and must be paid to BESCOM.

With an almost annual increase in the unit price of electricity and an increase in the number of electrical gadgets that consumers use, it’s only natural that power consumption and, with it, billing amounts will rise as well. The Additional Security Deposit is the difference between BESCOM’s current security deposit and what they are supposed to hold in connection to current billing.

Every year in March-April, BESCOM conducts an audit, during which the amount of the security deposit for consumers is computed. Officials further stated that they only requested ASD from customers if the additional cost was larger than Rs 200 for household customers and Rs 1,000 for commercial customers.

The Additional Security Deposit can be paid at any BESCOM sub-divisional office or at Bangalore One centers, exactly like the regular power bill. Ensure that the staff at the counter is aware that the payment is for the ASD.

Visit www.bescom.co.in and click on the text that says Online Payment to make an ASD payment online. This will lead you to a page where you can make a quick payment. Choose ASD after entering your Account ID (found on your bill) and the captcha (the available options are Pay Bill, ASD, ISD, and MSD). You can make the appropriate payment once you have agreed to the Terms & Conditions.

In Chhattisgarh, how much does electricity cost per unit?

  • You must pay 1.00 per unit and a fixed charge of 2.4 per unit with the and fixed costs for usage of 0 to 100 units.
  • Your per unit charge will be 1.1 above 100 and below 200, and your fixed charges will be 2.5.
  • It costs 1.7 per unit of electricity and 3.2 per unit of fixed charges for units 201 to 400.
  • The per-unit energy cost is 2.0, while the fixed cost per unit is 3.5 for 401 to 600.

How can I express my dissatisfaction with Cspdcl?

Complaint Numbers, Customer Service Numbers, and Helplines for CSPDCL You can also contact the state by dialing 1800-233-4687. Outside of the state, contact 0771-1912 for a toll-free helpline that is available 24 hours a day, 7 days a week.

In Chhattisgarh, how can I pay my electricity payment online?

  • Click on the URL https://cspdcl.co.in/cseb/(S(r4yfwejc4zpb1gwb5dqyusku))/frmOnlineBillPayment.aspx to get to the CSPDCL’s official website.
  • Click ‘Online Bill Payment’ under ‘Bill Payment Services’ on the left-hand side of the page.

Google Pay

  • If you’re paying your bill for the first time with Google Pay, select ‘Get Started’ and enter your ‘BP Number.’
  • After you’ve linked your accounts, you’ll be able to enter the billing amount and finish the transaction. You’ll get a notification verifying that your electricity bill was paid successfully.

PhonePe

  • To finish your bill payment, enter your ‘BP Number’ and follow the procedures. You will receive a message verifying the successful payment of the electricity bill once the payment is completed.

e-Wallets

You can pay your CSPDCL electricity bill with e-Wallets like Amazon pay, Mobikwik, Freecharge, and others. All you have to do now is choose your state and enter your BP number. The bill will appear on your screen, and you may then make the payment.

In an electricity bill, what is connected load?

  • Tariff and Category establish the rate structure that will be applied to the bill. Typical tariff codes begin with LT (Low Tension 230V single phase or 400 V three phases) or HT (High Tension 230V single phase or 400 V three phases) (High Tension 11kV and above). LT codes are commonly used for residential, business, and small office connections. Larger companies and complexes generally utilize HT codes. The bill’s category defines whether the connection is for residential, commercial, or industrial use. Different tariff codes apply to different rates/slabs, so it’s crucial to double-check that the correct tariff code is used on the electricity bill. As seen below, this information is available on the bill header:
  • Type of Supply & Connected Load (Fixed State/DISCOM Charges): The total pool of supply that is delivered to a meter is known as the Connected (or Sanctioned) Load. This is measured in kW. (or Killo-Watts). This is the maximum cumulative peak kW that can be assigned to a meter based on the appliances that are connected to it. This isn’t your actual energy usage; it simply affects your electricity bill’s set charges. The connected load also influences whether the connection is three-phase or single-phase. If the real load is higher than the sanctioned load, the fixed charges for that month will be affected, and some DISCOMs levy a penalty of higher fixed costs for the incremental increase in the actual load drawn. Every DISCOM has a method of determining the load to be sanctioned to the application, which should be checked on the company’s website because it differs widely, for example:
  • Based on the load of the linked appliances and the redundancy factor, an assessment is made.
  • Consumed Units (Unit Rates per State/Discom): The number of kWh (Kilowatt-Hour) consumed in a month is measured in units consumed. 1 kWh is the same as leaving a 100 Watt light bulb on for 10 hours. The difference between two consecutive month’s meter readings is used to calculate this data. The total monthly usage of all appliances linked to the meter is calculated here. This is the figure that must be reduced in order to lower the electricity cost. An analysis of consumption patterns can reveal which appliances use more electricity (typically Air Conditioners increase consumption in summers). You can use this link to estimate your likely energy use in units (kWh) based on the information from connected appliances in your home and average daily consumption.
  • Tariff Structure: It’s critical to pay attention to the tariff structure on your statement because it’s the best predictor of how much you can save. The construction is often slab-based for residential and SMB commercial connections (unlike industrial connections where units are charged at a high flat-rate). The goal of the slab structure is to encourage low-energy users while penalizing those who consume a lot of energy. The slabs are based on the previously mentioned “Units Consumed.” The energy charge fluctuates as the number of units consumed increases, as do the fixed costs associated (single-phase) with the slab. Here’s an example of a Mumbai bill’s rate structure:
  • Fuel Adjustment Charge (FAC): As seen in the tariff structure above, each slab has a different FAC rate. This is the extra power cost incurred owing to gasoline price increases over the course of a year. Coal is used as a source of energy in the majority of cases. According to a study, coal output rates would begin to drop after 2011, reaching 1990 levels by 2037 and reaching 50% of peak value in 2047. As a result, FAC will continue to rise until other sources of electricity are created to the point where they can generate electricity at that low a cost. As a result, electricity prices will almost certainly rise in the future.
  • Electricity Duty/Taxes (Relevant State Taxes): Each state has an Electricity (Duty) Act that defines the applicable taxes for various tariff structures, which can be found on one’s electricity bill. It should be noted that this tax is not covered by the GST as of one date. The following are the taxes that apply in Rajasthan (for example) for each category:

How much does one kilowatt-hour of electricity cost?

The kilowatt hour is the most fundamental unit of electricity (kWh). 1 kWh is the amount of energy consumed by a 1kW (1000 watt) electric heater for one hour.