Short Answer: You’ll be charged $17.5 per hour it runs, but will you keep the other rooms cool?
The average cost per kilowatt hour for our home customers is 13.7 cents. They consume 12800 watts per hour (or 1.28 kilowatt hours per hour) according to their specifications. If you leave the heater on for eight hours in one room while you’re at home, that’s 10.2 kilowatt hours every day, or $1.40 per day. This can add $42 to your utility bill in a month.
How much does it cost to run an EdenPURE heater on a monthly basis?
“I’ve recently seen a lot of advertising for electric heaters. The EdenPURE, Bob Vila’s favorite space heater, was featured in the News-Miner. In addition, Amish heaters appear to be very fashionable these days. Should I invest in one? enquired a recent member.
A typical 1,200 watt electric heater that is left on for four hours every day will add around $32 to your monthly electric bill. Because the EdenPURE heater uses 1.5 kilowatts1,500 watts per hour, it will cost you a little extra to run: $40 per month. But keep in mind that this is the extra cost of plugging in just one heater.
Why are electric heaters even available if they are such a lousy deal? Interior Alaska has higher electricity rates than the Lower 48 states. Electric heaters may be a suitable alternative where rates are less than 10 cents per kWh.
Why not skip a stage and convert oil to electric energy instead of running it via a power plant and then using the electricity to heat elements in an electric heater? Simply heat your home’s hot water using the oil in your boiler. You lose a little efficiency every time you convert one sort of energy to another.
Electric heaters can be handy at times. Heating a tiny place for a short amount of time is an example. You could plug in a space heater for a couple of hours to heat a single room instead of turning up the thermostat throughout the house. However, in the grand scheme of things, it’s definitely a better idea to keep the house temperature a little lower, wear a sweater, and avoid using energy-guzzling electric heaters entirely.
Is EdenPURE truly cost-effective?
- According to advertisements, the EdenPure can save up to 50% on heating costs. Your “heating bill,” i.e., your gas bill, may decrease, but your electric bill will increase. Whether you come out ahead depends on a variety of factors, including how much you use the heater and how much power you pay. Heating with gas is almost always less expensive than heating with electricity. It’s also worth noting that the phrase “by up to 50%” is used. To save money on your heating expense, EdenPure recommends setting your furnace to your desired temperature, then turning it down and relying on the EdenPure to keep the room warm. You’ll need another heater if you wish to heat more than one room. This is how you utilize electric space heaters, even those that aren’t as expensive as the EdenPure.
Consumer Reports tested and evaluated space heaters last year. EdenPure came in worst place out of 20 space heaters evaluated. The top performers, all of which were far less expensive than the EdenPure, were:
- HZ-519 or HX-515 Honeywell Electric Heater (about $60).
- $60 for the Holmes Quartz Tower.
- $80 for a DeLonghi SafeHeat Flat Panel.
The bottom line: You can acquire a space heater for a lot less money than the EdenPure, and depending on how you use it, you can save money on your gas account as well. Consider an oil-filled heater if you prefer the idea of stored, radiated heat.
When it comes to cleaning up after meals and loading and unloading the dishwasher, people have preferences: to rinse or not to rinse; silverware up or down; dry or not to dry. What is your opinion on how it should be done? Do you and your family have any dishwasher squabbles?
Are EdenPURE heaters a good investment?
EdenPure heaters’ manufacturer has been advised to stop claiming that the portable heaters are safer, superior, and save more energy than conventional heaters. After an assessment by the Electronic Retailing Self-Regulation program, Suarez Corp can continue to claim that the heaters are “manufactured in the USA.” An EdenPure model was recently tested by Consumer Reports for portable heaters, but it didn’t make the top eight rankings.
Among the EdenPure claims examined by the ERSP were the following:
“…the new EdenPure warms more efficiently, saves money on energy bills, and operates practically silently.”
“… manufactured in the United States of America with patent-pending dual heating technology. Our heaters are more effective, efficient, and well-built.”
“Children and pets can approach the EdenPure cabinet and touch it without harming themselves.”
While the American-made claim was approved, the ad watchdog determined that advertisers could not justify promises of monthly savings and that comparative safety and superiority claims should be discontinued. It also asked that the company discontinue safety claims involving children.
The big EdenPure Gen4, $397, performed mediocrely at room heating and very worse at spot heating in Consumer Reports space heater tests. However, according to the manufacturer, it was extremely silent and cool enough to safely touch. In our tests, other products got hot enough to inflict a burn. A tip-over safety switch was also missing from the EdenPure. The Duraflame 10HM4126-0107 ($230) and the Heat Surge HT-XL ($400) were two more huge heaters that performed better overall.
EdenPure has already made news, such as when Costco pulled the EdenPure US 1000 from its shelves last year after receiving allegations that it had a tendency to overheat. EdenPure stated it was a one-time occurrence and that it investigates all claims of the devices overheating or catching fire.
Are Eden Pure Energy Systems Effective?
EdenPURE claims to decrease unpleasant heat with a copper coil. This reduces the efficiency of their heater. Put a sheet of copper in front of your heater and use an electric heater to buffer the heat.
How much does a 1500 watt heater cost to run for 24 hours?
Actually, quite a bit. The majority of space heaters are powered by electricity. Standard electric space heaters consume 1,500 watts and produce around 5,000 BTU of heat. How much does an electric space heater cost to operate? Do heaters consume a lot of energy and boost your utility bill?
It’s simple to figure out how much it costs to run a 1,500-watt electric heater for an hour (or per day, week, month). It’s something that almost everyone can do.
Example (for varying wattages/kWh pricing, use the electric heater running cost calculator below): If we assume the price of electricity is $0.1319 per kWh, a 1,500-watt electric space heater will cost;
- Running costs $0.20 per hour.
- Running costs $4.80 every 24 hours (day). For instance, how much does a 1,500-watt heater cost to run for 24 hours? Simple. A heater like this uses 36 kWh of electricity. It will cost $4.80 to run a 1,500-watt heater for 24 hours.
- Running costs $11.20 per week (8 hours per day).
- Running costs $48.00 per month (8 hours per day).
With the following equation, we’ll show you how to determine the expected running cost of electric heaters:
Heating Operating Costs (per hour) = Power (W) * Electricity Price ($ per kWh) / 1,000
We’ll even figure out how much a 1,000W and a large 5,000W will add to your monthly costs. A running expenses table is also included, which shows how much it costs to run a 500W5,000W eclectic heater per hour and per day.
The cost of running all electric space heaters is determined by only two factors:
- Wattage of the heater What is the wattage of a space heater? The majority of space heaters require 1,500 watts of power. This is a measure of how powerful the heater is. Every electric heater’s wattage or power input is indicated on the specification sheet (under the heading ‘Power,’ you’ll see 1,000W5,000W).
- Electricity costs in your neighborhood. In all of our computations, we’ll use the $0.1319 per kilowatt-hour national average pricing in the United States. Electricity is cheaper in some states (below $0.10 per kWh; Louisiana, Montana, etc.) and more expensive in others (over $0.15 per kWh; New York, California, etc.).
We can determine how much it costs to run an electric space heater per hour using simply these two variables. We can use the following electric heater running cost calculators to make things easier. Simply enter the wattage and the cost of electricity to find out how much your heater costs to run each hour:
What type of heater is the most cost-effective to run?
Not only are infrared heaters one of the most cost-effective to run, but they’re also simple to operate.
Here are some of the advantages:
- Wall, panel, freestanding, ceiling heaters, and even as an art piece or a mirror are all fantastic alternatives!
- They are the ones that warm you up, not the air surrounding you. The heat will not be ruined by a cold draft.
- Because the warmth is identical to that of the sun, it is completely healthful and safe.
- The heat is immediately felt, and the entire room gradually warms up (and stays warm).
- There’s no need to waste money heating areas that aren’t being used because you may adjust the heaters independently.
- Drafts and cold air have no effect on them. If someone opens the door and lets the hot air out of a regular heater, the air must be heated again. The infrared spectrum remains unaffected. It keeps the stuff it has heated warm!
They also feature the lowest wattages of any type of space heater. As a result of all of this, infrared heaters can help you save up to 60% on your heating expenditures! What more can you ask for! While these heaters may appear to be a “new” alternative to some, they will have the smallest impact on your electric cost. While also providing a slew of other advantages.
What’s not to like about that? There are a few drawbacks:
- Infrared heaters might be more expensive up front than traditional heaters.
- They only heat the items that are directly in front of them. If you’re in an office and your computer screen is between you and the heater, the heat will be absorbed by your computer screen.
- They’re usually more permanent than a space heater that you can move between rooms if they’re mounted on the wall or ceiling.
- They usually have on/off controls rather than variable controls.
Is it possible to leave infrared heaters on all night?
Infrared heaters are generally safe to leave on overnight. They aren’t finicky, and any modern heater worth its salt has safety shut-off controls in case it overheats or falls over. Even so, if you’re leaving one on while you’re sleeping or out, you should be cautious.
I recommend that you use any timer settings available to turn the heat off automatically after a defined period of time. If you just need the room to be a little warmer while you sleep, this is a perfect option. Second, ensure sure the heater is not covered by anything combustible and that it is in good working order. Check for any damage to the heater or fraying of the power wire in particular.
Is it possible for infrared heaters to run continuously?
If infrared heating is more efficient than convection heating, we won’t have to worry about constantly turning it on and off like convection heating does. Right?
Infrared heating stores heat in the structure of the area, so it’s actually more effective to leave it on if it’s installed and designed appropriately.
To be clear, employing temperature settings is the most efficient way to set up an infrared heater. Infrared heaters should have a ‘on’ temperature, which is the temperature you want your house or business to be at when you’re there.
There should also be a ‘off’ temperature, which is the lowest temperature you will allow in your house or office. The ‘on’ temperature is usually set at 20oC or 21oC, with the ‘off’ temperature at 14oC or 15oC.
When configured in this manner, an infrared heating system has the following advantages:
A more palatable temperature
A well-made and efficient infrared heater will efficiently maintain both the ‘on’ and ‘off’ temperatures, consuming electricity (and not full power) only approximately 1/3 of the time.
Is it possible for infrared heaters to run continuously? Yes, and this is the ideal method to put them up if you want an efficient heating system.