In the United States, there are 5.4 million in-ground residential swimming pools, and according to Opower, those homes consume 49 percent more electricity each year than those without. The annual increase in energy use amounts to around $500 per home.
Pools consume a lot of energy; they utilize between 9 and 14 billion kilowatt hours of electricity each year, which is enough to power more than 11 states plus the District of Columbia.
Pool pumps take up to 2,500 KWh per year to circulate and filter about 20,000 gallons of water, which is roughly 5,000 gallons more than the average human will drink in a lifetime. The pool pump is the largest electricity consumer in the average pool-containing home, aside from the air conditioner. According to the report, a pool pump can add up to $300 to an annual power bill at the national average of 11.8 cents per KWh.
However, Opower’s analysis indicated that the large rise in energy usage of homes with swimming pools is due to more than just the pool itself.
What does it cost to maintain an above-ground pool?
How much does it cost to maintain an above-ground pool? Maintaining an above-ground pool costs around $115 per month. To run the pump, filter, and heater, you should anticipate to pay an extra $30 to $250 each month on your utility account.
How much power does a pool consume each month?
As previously said, the type of pump you use might have an impact on how much you pay in electric costs. Here’s an estimate of how much it will cost to run the three most prevalent pump types.
Variable Speed Pumps
Because they can regulate and alter the amount of power they use based on their task, variable speed pumps are the most energy-efficient of the primary pump types. If your pool pump is Energy Star certified, the average yearly cost of running a variable speed pump is around $125, or around $10.41 per month, making it the most cost-effective year-round alternative.
Single Speed Pumps
Single-speed pumps use more energy than variable-speed pumps since they can’t control their energy consumption like variable-speed pumps can. Single-speed pumps operate at maximum speed regardless of the work at hand, wasting energy and increasing your monthly costs.
The annual cost of running a single-speed pump is estimated to be roughly $450, or $37.50 per month.
Heaters/Heat Pumps
The cost of utilizing a heat pump to heat your pool is determined by two factors: the size of your collection and the temperature you want to heat it at. Heating a larger pool at a higher temperature consumes more energy than heating a smaller pool at a lower temperature.
The temperature of your pool is clearly a matter of personal opinion, but if you’re seeking to save money, a lower water temperature could be a good place to start.
Calculate the annual cost of running a heat pump in different areas and temperature zones with our pool heater size calculator. The median monthly price range for a heat pump system is between $100 and $300, depending on your location and the estimated period of use (summer versus year-round).
We’d also want to point out that using a pool cover reduces the cost of running a heat pump significantly. A pool cover can lower the average monthly cost down to $25-100.
How much energy does a pool pump consume on a daily basis?
It depends on the size of your pump and its energy efficiency. Pumps with more horsepower consume more amperage (which is what you pay for), resulting in more Kilowatt hours (kWh). Standard pump motors consume more amps than Energy Efficient (EE) motors. Based on what your power company charges per kWh and how many hours per day the pump is working, which varies depending on the season, our 1 hp (standard) example UST1102 motor will cost between $1 and $5 per day. A monthly expenditure of $30-$150 will emerge as a result of this.
A two-horsepower pump will not draw twice as many amps as our one-horsepower example motor UST1102, but it will draw more, around 25% more, up to 20/10 amps. The EE version of our example motor, the UCT1102 ‘The Conservationist,’ utilizes 11 / 5.5 max load amps, which is a savings of over 25%.
A 2 hp motor of the same type (UST1202) would draw 2.4 Kw per hour, but our 1 hp example pump requires 1.75 Kw per hour. Even if you just run 10 hours each day, that’s roughly 24 kWh per day, or 720 kWh per month. Many pumps must work longer during the hot months to keep pure water. Pool pumps, on the other hand, never get a day off.
Is investing in an above-ground pool worthwhile?
By far the most affordable pool choice is an above-ground pool. They’re popular with kids, and they’re safe thanks to built-in fence and locking gates. The most significant downside of an above-ground pool is that it adds no value to your home.
Is it expensive to keep an above-ground pool in good condition?
On the maintenance front, above-ground pool owners may anticipate to spend between $1,000 and $1,200 each year on maintenance.
What does it cost to have a pool pump running 24 hours a day?
MULTIPLY THE VOLTAGE BY THE AMPERAGE BY THE VOLTAGE BY THE AMPERAGE BY THE VOLTAGE BY THE AMPERAGE B The total WATTS will be calculated as a result of this. 115 volts x 15 amps Equals 1725 WATTS, for example.
TO GET KILOWATTS, DIVIDE the total WATTS by 1000. (KW). 1.725 kW = 1725 WATTS/1000 WATTS
MULTIPLY the number of hours each day that your pool pump is running by the kW. The kWh – kilowatt hour per day – will be added to this total. 24 hours x 1.725 kW = 41.40 kWh per day, for example.
MULTIPLY the daily kWh by the kWh cost. This information can be found on your most recent Hydro statement. The outcome will inform you how much it costs to run your pump on a daily basis. The pool pump costs $4.97 per day since it uses 41.40 kWh per day multiplied by.12 cents per kWh.
If you operate the identical pump on 230 Volt, the cost per day will be $2.49.
Is it expensive to run a pool pump?
A pool pump might cost anything from $7 to $30 per month to operate. One of the easiest ways to save money on electricity is to use a variable speed model. You can also save money by reducing the amount of time your pump runs.
How long should I run my swimming pool pump every day?
Now that you know your pool’s turnover rate and have double-checked that your pump is working properly (see what we did there? ), it’s time to start thinking about when you’ll operate your pump. Because every pool should be turned over at least once a day, most pool pumps should run for about 8 hours each day. But here’s the deal: you don’t have to run your pool pump in a row. You can set it to run for three hours before leaving for work in the morning and for another five hours in the evening.
Is it true that a swimming pool consumes a lot of electricity?
Swimming pools and spas consume a significant amount of energy. A swimming pool uses between 2000 and 3000 kWh of electricity per year, depending on the kind and size of the pump, the length of time the pump is run each day, and if the pool is heated. At 2018/19 rates, annual operating costs are typically between $800.00 and $1200.00.