The power rating of a geyser ranges from 500 Watts to 5000 Watts. For instance, if the geyser’s related power is 2000 Watts, the geyser will need 2kW each hour. As a result, it is optimal for a user to select the geyser that best meets his or her daily consumption needs.
“Total consumption E(kWh) = Geyser Rated Capacity * Total Operating Hours”
Furthermore, the following samples of a 25-litre geyser and a 10-litre geyser might assist you in understanding and calculating geyser power consumption.
- Assume Mr. A owns a 25-litre XYZ geyser. The geyser consumes 2000W per hour, according to the technical standards, and is typically used for 3 hours per day. As a result, according to the formula,
- Mrs. P purchased an ABC brand 10-litre geyser. The 10-litre geyser uses 2 kilowatts per hour, 48 kilowatts per day, 1440 kilowatts per month, and approximately 17520 kilowatts each year. If we use a unit pricing of Rs. 3, the total cost each day is roughly Rs. 144.
The cost of geyser electricity use is shown in the table above over the course of a year. Now that you understand how to measure geyser power consumption, you must also understand how to reduce geyser power consumption. The following section of the blog will walk you through the most important factors to consider when lowering geyser power use.
Is it true that geysers consume a lot of electricity?
If not done correctly, heating water in a geyser can be costly. To heat water, a water geyser uses a lot of energy. During the winter, this high electricity demand drives up the electricity cost. As a result, it is critical to use your hot water geyser effectively in order to reduce your monthly electricity expenditures.
Correct the thermostat settings of your geyser
A thermostat is found on the majority of geysers and water heaters. Thermostat regulates the temperature of the water in the geyser by switching off the power supply after the correct temperature is reached. The thermostat monitors the temperature of the water and turns on the power supply when the temperature lowers. The thermostat ensures that the water temperature is maintained at the desired level.
On the market, there are two types of geysers:
- One with a thermostat that may be adjusted from outside and is programmable
- Other places where the thermostat is hidden from view and can’t be changed
Is it more cost-effective to leave the geyser running?
When you think about it, both instances consume roughly the same amount of energy. If you choose to turn it off, it will take a lot of energy to re-heat the water. Allowing it to run consumes less energy but increases the length of time it takes. Your geyser accounts for 40% of your energy expenditures, which is a staggering figure. Reducing the amount of time you use the water heater will save you money and energy.
If you want to figure out which case will save you money on electricity, you’ll have to delve a little deeper. They’re being remodeled these days to heat water more quickly, but it means using a lot more energy. Although these geysers can keep the heated water at a high temperature without requiring a lot of electricity.
Energy efficient geysers in South Africa
More energy-efficient models are being produced, which will be more environmentally friendly as well as cost-effective. However, there are a number of other elements that influence your geyser usage and energy consumption, including the following:
- The geyser is depicted as a model.
- The amount of water utilized
- Instances of use
According to research and Eskom’s Geyser Fact Sheet, shutting off the geyser has no effect on electricity consumption. The heat loss after shutting off the geyser for 24 hours might be up to 10 degrees Celsius (known as’standing loss’). This amount has been established as a quality standard by the SABS. Yes, you have saved energy if you utilize this water without re-heating it. Turning off your geyser to save electricity was a waste if you repeat the heating procedure.
Keeping it turned on day in and day out, on the other hand, does not help conserve any energy. You can turn it off for a longer amount of time, for example, if you’re going out of town or won’t need hot water for a while.
Saving electricity with the geyser
So that issue has been resolved, but there is still no solution. Here’s what you can do if you’re serious about conserving energy. Isotherm thermal insulation can be used to insulate your geyser and pipes, preventing heat loss. This heat loss, believe it or not, accounts for a large amount of energy loss. Make use of a high-quality thermal blanket. Insulate your geyser and leave it running all the time. It will lower the amount of energy required to keep the water at a high temperature.
An insulated geyser that has been turned off for 24 hours saves 20% energy while reheating the water, according to studies.
Correct thermostat settings before off turning off the geyser
The ideal temperature is 60 degrees Celsius. The higher the temperature, the greater the amount of energy required. It’s also a good idea to put it closer to the bathroom because it decreases the amount of heat lost by the water as it rests in the pipes.
Use cold water instead
Yes, some washing tasks can be completed with cold water. Cold water can be used for dishes, laundry, and hand washing. It also helps to lower the temperature settings on the dishwasher and washing machine. Replace your shower head with one that saves water and electricity. It can help you save up to 24% on water and electricity.
Solar power
The ideal answer. Solar water heaters are expensive up front, but they save money in the long run. Furthermore, they are incredibly eco-friendly. If you want to save money on your power bill, ensure sure your geyser is in good working order. It’s not about turning off the geyser or letting it flow; it’s about using it responsibly. More information on green building in South Africa can be found here.
What does it cost to operate a geyser?
In a four-person household, a 200-litre electric geyser requires on average 14kWh of electricity every day. Over the course of a month, that’s 420kWh, which works out to R840 a month for water heating alone at an average of R2/kWh. Through smarter energy management, a Geasy gadget can decrease this cost by up to 40%.
How long does it take a 150-liter geyser to heat up?
The standing heat loss of geysers built to SABS standards is strictly regulated, and the insulation requirements are governed by SANS 151. (SANSSouth African National Standards).
At a stored water temperature of 65 degrees C and no water drawn off during the 24 hour period, the maximum permissible heat loss for a 150lt capacity geyser (the most typical geyser size) is 1,377kW per 24 hours. This amounts to a temperature drop of 8 to 10 degrees Celsius during the course of 24 hours. A 150lt geyser will take approximately 3 hours to heat from completely cold water (15 degrees C) to 65 degrees C, equating to 8.72kW of electricity with a 3kW element and costing approximately R14,38 (assuming R1,65/kWh), but keep in mind that geysers are rarely heated from completely cold because not all the hot water is drawn off at once.
You are supporting Eskom by load shifting by turning off the geyser during peak electricity demand hours (mornings and early evenings), but you are saving little money. The geyser will not be harmed if you turn it on and off several times.
The only practical way to save money on a geyser’s energy bill is to minimize the volume of water that is heated and drawn off, i.e. reduce your hot water consumption, and lower the temperature setting of the water on the thermostat. In the summer, 50 to 55 degrees is ideal, and in the winter, 60 to 65 degrees is ideal.
What happens if you leave the geyser on for 12 hours?
If the geyser is left on for more than 24 hours, it may become overheated or rupture, resulting in an accident. However, if the geyser has an auto switch option, such mishaps can be prevented.
How can I lower my geyser’s power consumption?
How to Save Money and Reduce Energy Consumption When Using Geysers
- Protect your geyser by insulating it. Each day, a little amount of heat drains into the surroundings of your electric geyser, resulting in gradual cooling.
- Reduce the temperature of your geyser.
- Use only what is required.
- Replace the showerhead.
What in a house consumes the most electricity?
The breakdown of energy use in a typical home is depicted in today’s infographic from Connect4Climate.
It displays the average annual cost of various appliances as well as the appliances that consume the most energy over the course of the year.
Modern convenience comes at a cost, and keeping all those air conditioners, freezers, chargers, and water heaters running is the third-largest energy demand in the US.
Here are the things in your house that consume the most energy:
- Cooling and heating account for 47% of total energy consumption.
- Water heater consumes 14% of total energy.
- 13 percent of energy is used by the washer and dryer.
- Lighting accounts for 12% of total energy use.
- Refrigerator: 4% of total energy consumption
- Electric oven: 34% energy consumption
- TV, DVD, and cable box: 3% of total energy consumption
- Dishwasher: 2% of total energy consumption
- Computer: 1% of total energy consumption
One of the simplest ways to save energy and money is to eliminate waste. Turn off “vampire electronics,” or devices that continue to draw power even when switched off. DVRs, laptop computers, printers, DVD players, central heating furnaces, routers and modems, phones, gaming consoles, televisions, and microwaves are all examples.
A penny saved is a cent earned, and being more energy efficient is excellent for your wallet and the environment, as Warren Buffett would undoubtedly agree.