You won’t be able to tell if your new driving style and skills are effective unless you know your car’s average miles per gallon (mpg). On-board computers are available in some vehicles, however they are not always reliable.
- Subtract the number of miles travelled from the litres of gasoline consumed (miles per litre)
Example
Stages one and two are completed by Frank. When he next fills up, his trip meter reads 160.1 miles. Filling his tank takes 22.3 litres. Frank calculates his gasoline consumption to be:
What is the formula for calculating the amount of fuel consumed?
The formula below is used to determine fuel consumption in litres per 100 kilometers, which is the most often used unit of measurement.
How is the fuel consumption of a diesel engine calculated?
It’s crucial to remember that depending on how fast you’re traveling and other factors, your fuel consumption may reduce or increase. A gasoline meter put on your boat is the only true way to measure fuel use. However, while calculating your fuel use isn’t always perfect, it’s a wonderful place to start! On the sea, miles are difficult to measure, hence Gallons Per Hour (GPH) is utilized instead of the conventional MPH.
Pen and Paper Method
“…put in its horsepower rating and multiply it by the specific fuel consumption average, then divide the product by the fuel specific weight,” says the author. *
How do you figure out how many kilometers per litre you have?
If you know the distance traveled and the amount of fuel consumed to travel that distance, calculating your car’s fuel consumption is simple. This is what you must do:
- Make a note of the current miles on your odometer. Reset the trip odometer on your automobile if it has one.
- Use your trip odometer to figure out how far you’ve driven since your last fill-up. If you don’t have a trip odometer, subtract the first odometer reading from the latest odometer reading to figure out how far you’ve gone.
- Simply divide the total distance travelled by the total litres of fuel used to get how many kilometers your automobile can travel on one litre of fuel. For example, 400 kilometers divided by 42 litres equals 9.5 kilometers per litre.
- To calculate the fuel efficiency of your car (Metric System), multiply the amount of fuel consumed by 100 and divide by the total number of kilometers driven. Example: 42 litres multiplied by 100 / 400 equals 10.5 litres every 100 kilometers.
Tip: To compare your fuel economy over time, repeat this step at random. If your fuel economy suddenly improves, it could be a sign of a mechanical problem that requires professional care. Many things might have a good or negative impact on your vehicle’s fuel economy. Driving styles, road conditions, and your car’s general mechanical condition are all elements to consider. If you want to learn how to enhance your car’s fuel economy, read Fuel Efficient Driving Techniques.
Litres per 100km (l/100km)
You’ll need the amount of litres it took to fill your tank the last time it was filled, as well as the distance you drove between fills.
How can you figure out how much a litre of gasoline costs?
How to Calculate the Cost of Fuel Any trip’s total fuel cost can be determined by multiplying the distance traveled by the fuel consumption and per-litre fuel cost.
How can you figure out how much gasoline you use each kilowatt-hour?
How Do You Calculate A Diesel Engine’s Fuel Consumption Per Hour? A formula for calculating the maximum engine fuel consumption in gallons per hour (GPH) multiplied by the fuel specific weight. GPH = 7.2 (0.4 x 300)/hp = 105/7.2 = 17.6 in the case of a 300-hp diesel engine.
What is the kWh value of a litre of diesel?
One litre of diesel fuel (auto) has an energy content of approximately 38 MJ which approximates to 10 kWh (using a ballpark figure) but the efficiency of conversion into kinetic energy is only about 30% – that is better than petrol which is typically 25% depending on the design.
What is the fuel consumption rate?
Before going any further, it’s important to define the terms fuel efficiency and fuel consumption; these two phrases are frequently used interchangeably and erroneously, resulting in misunderstanding and inaccurate interpretations:
Fuel economy is a metric that expresses how far a vehicle can travel on a gallon of gas. It is measured in miles per gallon. This is a common metric in the United States that has been used for a long time by customers; it is also used by vehicle makers and regulators, mostly to communicate with the public. Fuel economy is a metric that measures the distance traveled per unit of fuel.
The inverse of fuel economy is fuel consumption. It is the amount of fuel used to travel a specific distance. It is measured in gallons per 100 miles in the United States, and in liters per 100 kilometers in Europe and other parts of the world. Fuel consumption is a basic engineering statistic that is directly related to the amount of fuel spent per 100 miles and can be used to calculate volumetric fuel savings. It is actually fuel usage that is the issue.
Is it possible to convert Litres to kWh?
Converting Gasoline to Kilowatt Hours (l gas to kWh) Using our Gasolineto Kilowatt Hour converter, you can see that one gallon of gasoline equals 9.5 kilowatt hours. As a result, all we have to do to convert Gasoline to Kilowatt Hour is multiply the quantity by 9.5.